All IPs > Analog & Mixed Signal
Analog & Mixed Signal semiconductor IPs are essential components in modern electronics, serving as the backbone for a wide range of applications that require the processing, conversion, and management of both analog and digital signals. This category encompasses a diverse array of integrated circuit designs and modules that facilitate the seamless handling of signal variations, ensuring the performance and efficiency of electronic devices.
The category includes Analog-to-Digital (A/D) and Digital-to-Analog (D/A) Converters, crucial for the conversion of signals between their analog and digital forms, enabling precise data processing and communication in devices such as smartphones, audio equipment, and sensor interfaces. Amplifiers, Analog Comparators, and Analog Filters further enhance signal fidelity by boosting signal strength, comparing voltages, and removing unwanted noise or frequency components, respectively.
Analog & Mixed Signal IPs also feature specialized components like Phase-Locked Loops (PLLs) and Delay-Locked Loops (DLLs) that are pivotal in frequency synthesis and timing signal alignment in high-speed data communication systems. Power Management IPs, including DC-DC Converters, ensure optimal energy efficiency by effectively regulating voltage levels and power distribution across electronic systems.
Additional solutions such as Clock Synthesizers, RF Modules, and Photonics components address the growing needs for high-frequency signal generation, wireless communication enhancement, and optical signal processing. The category also contains Analog Front Ends and Multiplexers, which are integral in conditioning and selecting signals in complex systems, highlighting the expansive utility of Analog & Mixed Signal semiconductor IPs in contemporary electronic design and innovation.
The KL730 is a third-generation AI chip that integrates advanced reconfigurable NPU architecture, delivering up to 8 TOPS of computing power. This cutting-edge technology enhances computational efficiency across a range of applications, including CNN and transformer networks, while minimizing DDR bandwidth requirements. The KL730 also boasts enhanced video processing capabilities, supporting 4K 60FPS outputs. With expertise spanning over a decade in ISP technology, the KL730 stands out with its noise reduction, wide dynamic range, fisheye correction, and low-light imaging performance. It caters to markets like intelligent security, autonomous vehicles, video conferencing, and industrial camera systems, among others.
The Mixel MIPI C-PHY IP (MXL-CPHY) is a high-frequency, low-power, low cost, physical layer. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The C-PHY configuration consists of up to three lane modules and is based on 3-Phase symbol encoding technology, delivering 2.28 bits per symbol over three-wire trios and targeting a maximum rate of 2.5 Gsps, 5.7Gbps. The C-PHY is partitioned into a digital module – CIL (Control and Interface Logic) and a mixed-signal module. The PHY IP is provided as a combination of soft IP views (RTL, and STA Constraints) for the digital module, and hard IP views (GDSII/CDL/LEF/LIB) for the mixed-signal module. This unique offering of both soft and hard IP permits architectural design flexibility and seamless implementation in customer-specific design flow. The CIL module interfaces with the protocol layer and determines the global operation of the module. The interface between the PHY and the protocol is using the PHY-Protocol Interface (PPI). The mixed-signal module includes high-speed signaling mode for fast-data traffic and low-power signaling mode for control purposes. During normal operation, a lane switches between low-power and high-speed mode. Bidirectional lanes can also switch communication direction. The change of operating mode or direction requires enabling and disabling of certain electrical functions. These enable and disable events do not cause glitches on the lines that would result in a detection of incorrect signal levels. All mode and direction changes are smooth to always ensure a proper detection of the line signals. Mixel’s C-PHY is a complete PHY, silicon-proven at multiple foundries and multiple nodes. It is built to support the MIPI Camera Serial Interface (CSI) and Display Serial Interface (DSI).
The Mixel MIPI C/D-PHY combo IP (MXL-CPHY-DPHY) is a high-frequency low-power, low cost, physical layer compliant with the MIPI® Alliance Standard for C-PHY and D-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The PHY can be configured as a MIPI Master or MIPI Slave, supporting camera interface CSI-2 v1.2 or display interface DSI v1.3 applications in the D-PHY mode. It also supports camera interface CSI-2 v1.3 and display interface DSI-2 v1.0 applications in the C-PHY mode. The high-speed signals have a low voltage swing, while low-power signals have large swing. High-Speed functions are used for high-speed data traffic while low-power functions are mostly used for control. The C-PHY is based on 3-Phase symbol encoding technology, delivering 2.28 bits per symbol over three-wire trios, operating with a symbol rate range of 80 to 4500 Msps per lane, which is the equivalent of about 182.8 to 10260 Mbps per lane. The D-PHY supports a bit rate range of 80 to 1500 Mbps per Lane without deskew calibration, and up to 4500 Mbps with deskew calibration. The low-power mode and escape mode are the same in both the D-PHY and C-PHY modes. To minimize EMI, the drivers for low-power mode are slew-rate controlled and current limited. The data rate in low-power mode is 10 Mbps. For a fixed clock frequency, the available data capacity of a PHY configuration can be increased by using more lanes. Effective data throughput can be reduced by employing burst mode communication. Mixel’s C-PHY/D-PHY combo is a complete PHY, silicon-proven at multiple foundries and multiple nodes. The C/D-PHY is fully integrated and has analog circuitry, digital, and synthesizable logic.
The agilePMU Subsystem is an efficient and highly integrated power management unit for SoCs/ASICs. Featuring a power-on-reset, multiple low drop-out regulators, and an associated reference generator. The agilePMU Subsystem is designed to ensure low power consumption while providing optimal power management capabilities. Equipped with an integrated digital controller, the agilePMU Subsystem offers precise control over start-up and shutdown, supports supply sequencing, and allows for individual programmable output voltage for each LDO. Status monitors provide real-time feedback on the current state of the subsystem, ensuring optimal system performance. Agile Analog designs are based on tried and tested architectures to ensure reliability and functionality. Our automated design methodology is programmatic, systematic and repeatable leading to analog IP that is more verifiable, more robust and more reliable. Our methodology also allows us to quickly re-target our IP to different process options. Our highly configurable and multi-node analog IP products are developed to meet the customer’s exact requirements. These digitally-wrapped and verified solutions can be seamlessly integrated into any SoC, significantly reducing complexity, time and costs.
The Mixel MIPI D-PHY IP (MXL-DPHY) is a high-frequency low-power, low cost, source-synchronous, physical layer compliant with the MIPI® Alliance Standard for D-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) Although primarily used for connecting cameras and display devices to a core processor, this MIPI PHY can also be used for many other applications. It is used in a master-slave configuration, where high-speed signals have a low voltage swing, and low-power signals have large swing. High-speed functions are used for high-speed data traffic while low-power functions are mostly used for control. The D-PHY is partitioned into a Digital Module – CIL (Control and Interface Logic) and a Mixed Signal Module. It is provided as a combination of Soft IP views (RTL, and STA Constraints) for Digital Module, and Hard IP views (GDSII/CDL/LEF/LIB) for the Mixed Signal Module. This unique offering of Soft and Hard IP permits architectural design flexibility and seamless implementation in customer-specific design flow. The CIL module interfaces with the protocol layer and determines the global operation of the lane module. The interface between the D-PHY and the protocol is called the PHY-Protocol Interface (PPI). During normal operation, the data lane switches between low-power mode and high-speed mode. Bidirectional lanes can also switch communication direction. The change of operating mode or direction requires enabling and disabling certain electrical functions. These enable and disable events do not cause glitches on the lines that would otherwise result in detections of incorrect signal levels. Therefore, all mode and direction changes occur smoothly, ensuring proper detection of the line signals. Mixel’s D-PHY is a complete PHY, silicon-proven at multiple foundries and multiple nodes. This MIPI PHY is fully integrated and has analog circuitry, digital, and synthesizable logic. Our D-PHY is built to support the MIPI Camera Serial Interface (CSI) and Display Serial Interface (DSI) using the PHY Protocol Interface (PPI). Mixel has provided this IP in many different configurations to accommodate different applications. The Universal Lane configuration can be used to support any allowed use-case, while other configurations are optimized for many different use cases such as Transmit only, Receive only, DSI, CSI, TX+ and RX+. Both TX+ and RX+ configurations support full-speed loopback operation without the extra area associated with a universal lane configuration.
iWave Global introduces the ARINC 818 Switch, a pivotal component in the management and routing of video data within avionics systems. Designed for applications that require efficient video data distribution and management, the switch is optimized for performance in environments with stringent data handling requirements. The switch's architecture supports a high level of bandwidth, allowing for the smooth routing of multiple video streams in real-time. Its design includes advanced features that ensure low-latency, error-free data transfer, integral to maintaining the integrity and reliability of video data in critical applications. Featuring robust interoperability characteristics, the ARINC 818 Switch easily integrates into existing systems, facilitating modular expansion and adaptability to new technological standards. It is indispensable for any aerospace project that involves complex video data management, providing a stable platform for video data routing and switching.
Silicon Creations delivers precision LC-PLLs designed for ultra-low jitter applications requiring high-end performance. These LC-tank PLLs are equipped with advanced digital architectures supporting wide frequency tuning capabilities, primarily suited for converter and PHY applications. They ensure exceptional jitter performance, maintaining values well below 300fs RMS. The LC-PLLs from Silicon Creations are characterized by their capacity to handle fractional-N operations, with active noise cancellation features allowing for clean signal synthesis free of unwanted spurs. This architecture leads to significant power efficiencies, with some IPs consuming less than 10mW. Their low footprint and high frequency integrative capabilities enable seamless deployments across various chip designs, creating a perfect balance between performance and size. Particular strength lies in these PLLs' ability to meet stringent PCIe6 reference clocking requirements. With programmable loop bandwidth and an impressive tuning range, they offer designers a powerful toolset for achieving precise signal control within cramped system on chip environments. These products highlight Silicon Creations’ commitment to providing industry-leading performance and reliability in semiconductor design.
The agileADC analog-to-digital converter is a traditional Charge-Redistribution SAR ADC that is referenced to VDD, VSS. The architecture can achieve up to 12-bit resolution at sample rates up to 64 MSPS. It includes a 16-channel input multiplexor that can be configured to be buffered or unbuffered, and support differential or single-ended inputs. Agile Analog designs are based on tried and tested architectures to ensure reliability and functionality. Our automated design methodology is programmatic, systematic and repeatable leading to analog IP that is more verifiable, more robust and more reliable. Our methodology also allows us to quickly re-target our IP to different process options. Our highly configurable and multi-node analog IP products are developed to meet the customer’s exact requirements. These digitally-wrapped and verified solutions can be seamlessly integrated into any SoC, significantly reducing complexity, time and costs.
The Mixel MIPI M-PHY (MXL-MPHY) is a high-frequency low-power, Physical Layer IP that supports the MIPI® Alliance Standard for M-PHY. (Learn more about Mixel’s MIPI ecosystem at Mixel MIPI Central which gives you access to Mixel’s best of class MIPI ecosystem supply chain partners.) The IP can be used as a physical layer for many applications, connecting flash memory-based storage, cameras and RF subsystems, and for providing chip-to-chip inter-processor communications (IPC). It supports MIPI UniPro and JEDEC Universal Flash Storage (UFS) standard. By using efficient BURST mode operation with scalable speeds, significant power savings can be obtained. Selection of signal slew rate and amplitude allows reduction of EMI/RFI, while maintaining low bit error rates.
The Ring PLLs offered by Silicon Creations illustrate a versatile clocking solution, well-suited for numerous frequency generation tasks within integrated circuit designs. Known for their general-purpose and specialized applications, these PLLs are crafted to serve a massive array of industries. Their high configurability makes them applicable for diverse synthesis needs, acting as the backbone for multiple clocking strategies across different environments. Silicon Creations' Ring PLLs epitomize high integration with functions tailored for low jitter and precision clock generation, suitable for battery-operated devices and systems demanding high accuracy. Applications span from general clocking to precise Audio Codecs and SerDes configurations requiring dedicated performance metrics. The Ring PLL architecture achieves best-in-class long-term and period jitter performance with both integer and fractional modes available. Designed to support high volumes of frequencies with minimal footprint, these PLLs aid in efficient space allocation within system designs. Their use of silicon-proven architectures and modern validation methodologies assure customers of high reliability and quick integration into existing SoC designs, emphasizing low risk and high reward configurations.
The ARINC 818 Product Suite by Great River Technology provides a comprehensive solution for high-performance digital video transmission in avionics applications. It supports the implementation, qualification, testing, and simulation of ARINC 818 products. This suite allows developers to access essential ARINC 818 tools and resources. It ensures optimal performance and reliability in mission-critical equipment by offering both hardware and software components tailored for the ARINC 818 standard. With its focus on high-speed data transfer and signal integrity, the ARINC 818 Product Suite is ideal for applications requiring lossless video transmission and real-time data handling in challenging conditions.
With a focus on maintaining signal integrity in high-speed interfaces, the PCIe Retimer extends the reach of PCI Express connections while preserving data quality. Essential for long signal paths, it works by regenerating signals to boost performance and provide reliable connections across distances. The retimer is particularly effective in environments with substantial electromagnetic interference, ensuring data transmission remains error-free and efficient across extended cable runs. By including line equalization and using advanced clock recovery techniques, the PCIe Retimer strengthens signal quality, allowing for greater system performance and reliability in a wide array of computing applications.
Altek's 3D Imaging Chip is a breakthrough in the field of vision technology. Designed with an emphasis on depth perception, it enhances the accuracy of 3D scene capturing, making it ideal for applications requiring precise distance gauging such as autonomous vehicles and drones. The chip integrates seamlessly within complex systems, boasting superior recognition accuracy that ensures reliable and robust performance. Building upon years of expertise in 3D imaging, this chip supports multiple 3D modes, offering flexible solutions for devices from surveillance robots to delivery mechanisms. It facilitates medium-to-long-range detection needs thanks to its refined depth sensing capabilities. Altek's approach ensures a comprehensive package from modular design to chip production, creating a cohesive system that marries both hardware and software effectively. Deployed within various market segments, it delivers adaptable image solutions with dynamic design agility. Its imaging prowess is further enhanced by state-of-the-art algorithms that refine image quality and facilitate facial detection and recognition, thereby expanding its utility across diverse domains.
The 16-bit Sigma-Delta ADC achieves a conversion rate of 16KSPS, leveraging SMIC's 55nm 2P7M CMOS technology. It incorporates a programmable gain feature ranging from 0 to 50dB alongside a configurable microphone bias. Supporting both mono audio input and four channels of fully differential inputs, this ADC delivers precise analog signal conversion. Boasting high signal quality verified by a signal-to-noise ratio (SNR) of 90dB, this component is optimized for applications within the audio domain, ensuring high fidelity and low power operation, ideal for compact audio processing solutions.
The PDM-to-PCM Converter from Archband Labs leads in transforming pulse density modulation signals into pulse code modulation signals. This converter is essential in applications where high fidelity of audio signal processing is vital, including digital audio systems and communication devices. Archband’s solution ensures accurate conversion, preserving the integrity and clarity of the original audio. This converter is crafted to seamlessly integrate with a wide array of systems, offering flexibility and ease-of-use in various configurations. Its robust design supports a wide range of input frequencies, making it adaptable to different signal environments. The PDM-to-PCM Converter also excels in minimizing latency and reducing overhead processing times. It’s engineered for environments where precision and sound quality are paramount, ensuring that audio signals remain crisp and undistorted during conversion processes.
Silicon Creations' Free Running Oscillators provide dependable timing solutions for a range of applications such as watchdog timers and core clock generators in low-power systems. These oscillators, crafted with compactness and efficiency in mind, support a gamut of processes from 65nm to the latest 3nm technologies. These oscillators excel in low power consumption, often requiring less than 30µW during operation. Their robust design ensures they deliver high precision over a temperature range from -40°C to 125°C with supply voltage variabilities factored in. The simplicity in design negates the need for external components, promoting easier integration and reduced overall system complexity. Precise tuning capabilities allow for accuracy levels up to ±1.5% after process trimming, ensuring outstanding performance in volatile environmental conditions. This level of reliability makes them ideal for integration into various consumer electronics, automotive controls, and other precision-demanding applications where space and power constraints are critical.
Silicon Creations crafts highly reliable LVDS interfaces designed to meet diverse application needs, going from bi-directional I/Os to specialized uni-directional configurations. Spanning process compatibilities from 90nm CMOS to advanced 7nm FinFET, these interfaces are a cornerstone for high-speed data communication systems, thriving particularly in video data transmission and chip-to-chip communications. Supporting robust data rates over multiple channels, the LVDS Interfaces guarantee flexible programmability and protocol compatibility with standards such as FPD-Link and Camera-Link. They capitalize on proven PLL and CDR architectures for superior signal integrity and error-free data transfers. Operating efficiently in various technology nodes, they remain highly effective across collaborative chipset environments. The interfaces are fortified with adaptable features like dynamic phase alignment to stabilize data sequences and on-die termination options for superior signal integrity. Their proven record places them as a critical enabler in applications where consistent high-speed data transfer is paramount, demonstrating Silicon Creations’ prowess in delivering industry-leading communication solutions.
The EW6181 is an advanced multi-GNSS silicon solution designed for high sensitivity and precision. This powerful chip supports GPS, Glonass, BeiDou, Galileo, SBAS, and A-GNSS, offering integration flexibility with various applications. Its built-in RF frontend and digital baseband facilitate robust signal processing, controlled by an ARM MCU. The EW6181 integrates essential interfaces for diverse connectivity, matched with DC-DC converters and LDOs to minimize BOM in battery-driven setups. This silicon marries low power demands with strong functional capabilities, thanks to proprietary algorithms that optimize its operation. It’s engineered to deliver exceptional accuracy and sensitivity in both standalone and cloud-related environments, adapting smoothly to connected ecosystems for enhanced efficiency. Its compact silicon footprint further enhances its suitability for applications needing prolonged battery life and reliable positioning. With a focus on Antenna Diversity, the EW6181 shines in dynamic applications like action cameras and smartwatches, ensuring clear signal reception even when devices rapidly rotate. This aspect accentuates the chip's ability to maintain consistent performance across a range of challenging environments, reinforcing its role in the forefront of GNSS technology.
aLFA-C is another notable product from Caeleste, intended for diverse applications requiring refined imaging capabilities. This sensor is exemplary in balancing speed and precision, catering to both scientific and industrial imaging requirements. Its design includes advanced features that ensure reliable image quality, even in suboptimal lighting conditions, making it a versatile tool for industries that demand rigorous accuracy.\n\nBuilt by leveraging Caeleste's extensive knowledge in CMOS image sensor technology, the aLFA-C provides users with flexibility in utilization across varying scenarios. From capturing high-speed industrial processes to detailed life sciences imaging, this sensor adapts to deliver optimal results. Its robustness and precision imaging are supported by sophisticated sensor architecture that minimizes noise while maintaining the integrity of the readout signal.\n\nCaeleste’s focus on offering customizable solutions is evident in the aLFA-C sensor's adaptability to different usage parameters, allowing users to achieve their specific imaging goals. The sensor represents a blend of performance and adaptability, ensuring that whatever the need, from industrial inspections to detailed scientific analysis, aLFA-C consistently delivers.
The agileVGLITCH voltage monitor provides security and protection against voltage side-channel attacks (SCAs) and tampering such as supply voltage changes/glitches and power supply manipulation. The sensor provides digital outputs to warn (secure) processors of intrusion attempts, thus enabling a holistic approach to hardware security. As a key part of the agileSCA TVC (Temperature, Voltage, Clock) security sensor this can be tuned to your specifications. It is ideally suited for monitoring in application areas such as IoT, AI, security and automotive. Agile Analog designs are based on tried and tested architectures to ensure reliability and functionality. Our automated design methodology is programmatic, systematic and repeatable leading to analog IP that is more verifiable, more robust and more reliable. Our methodology also allows us to quickly re-target our IP to different process options. Our highly configurable and multi-node analog IP products are developed to meet the customer’s exact requirements. These digitally-wrapped and verified solutions can be seamlessly integrated into any SoC, significantly reducing complexity, time and costs.
Revolutionizing SoC power delivery, the Aeonic Power family integrates state-of-the-art on-die voltage regulation capabilities. Its design supports energy and BOM optimization through a highly configurable framework that addresses a range of power delivery needs. Notably, Aeonic Power offers unprecedented telemetry oriented around Power Delivery Networks (PDN). This functionality is critical for gaining insights into SoC power behavior, providing capabilities for real-time monitoring and performance enhancement. This integration serves to reduce energy consumption through dynamic voltage and frequency scaling (DVFS) and virtual power islands. Flexible in application, Aeonic Power is ideal for handling the power complexities of chiplets and die-to-die interfaces. Its robustness and programmability aspire to suppress noise and harmonize power distribution across various SoC environments, facilitating reliable power management.
The Digital PreDistortion (DPD) Solution offered by Systems4Silicon is a versatile technology aimed at significantly enhancing the efficiency of RF power amplifiers. This advanced sub-system is scalable and adaptable to both ASIC and FPGA platforms, ensuring broad compatibility across various device vendors. The DPD solution meticulously enhances linearity, crucial for devices operating within multi-standard environments, such as 5G and O-RAN systems.\n\nDesigned to optimize the signal processing in transmission systems, this DPD technology allows for considerable power savings by enabling amplifiers to function more efficiently. Systems4Silicon’s approach ensures that the system can maintain its performance across different transmission bandwidths, which can scale to 1 GHz or higher. This makes it particularly valuable for large-scale and high-frequency applications.\n\nThe DPD technology's implementation is straightforward, providing a field-proven solution that integrates seamlessly with current infrastructures. Its adaptability is not merely limited to the hardware spectrum but extends to accommodate evolving communication standards, ensuring it remains relevant and effective in diverse market scenarios.
The ARINC 818-3 IP Core from iWave Global represents an advancement in avionics video interface technology, designed for high-speed and high-fidelity video data transmission. This IP core addresses the needs of modern aerospace systems that require robust video communication links both for military and commercial use. It supports a wide array of enhancements over previous generations, including increased bandwidth and improved signal integrity. This ensures that the ARINC 818-3 IP Core can handle the demands of next-generation avionic systems seamlessly, supporting advanced video processing and display systems. The core's design prioritizes modularity and scalability, allowing for easy integration and expansion to meet evolving system requirements. It is positioned as an essential tool for aviation applications demanding high reliability and accuracy in video data handling and display solutions, making it indispensable for new and retrofitted aerospace projects.
SkyeChip's Bandgap represents an essential voltage reference solution, designed to provide a stable output across varying temperatures and load conditions. With an output voltage of 0.9V and a current tolerance of +/- 10%, this bandgap reference is ideal for precision circuits that demand consistent performance. Operating efficiently within a wide temperature range from -40°C to 125°C, the Bandgap's robust design ensures stability and reliability even in harsh environments, while consuming less than 500 µW of power. This makes it an excellent choice for embedded systems and low-power applications where maintaining power efficiency is critical.
The Digital Radio (GDR) from GIRD Systems is an advanced software-defined radio (SDR) platform that offers extensive flexibility and adaptability. It is characterized by its multi-channel capabilities and high-speed signal processing resources, allowing it to meet a diverse range of system requirements. Built on a core single board module, this radio can be configured for both embedded and standalone operations, supporting a wide frequency range. The GDR can operate with either one or two independent transceivers, with options for full or half duplex configurations. It supports single channel setups as well as multiple-input multiple-output (MIMO) configurations, providing significant adaptability in communication scenarios. This flexibility makes it an ideal choice for systems that require rapid reconfiguration or scalability. Known for its robust construction, the GDR is designed to address challenging signal processing needs in congested environments, making it suitable for a variety of applications. Whether used in defense, communications, or electronic warfare, the GDR's ability to seamlessly switch configurations ensures it meets the evolving demands of modern communications technology.
This IP core is engineered for applications where minimal latency is of paramount importance. The Ultra-Low Latency 10G Ethernet MAC features an optimized architecture to provide rapid data transmission and reception capabilities, ensuring that all processes occur smoothly and efficiently. It is tailored specifically for real-time operations where every millisecond counts, like high-frequency trading and real-time monitoring systems. By focusing on reducing latency, this Ethernet MAC core delivers exceptional performance, making it an excellent choice for demanding environments that cannot afford delayed communication. The core's architecture reduces overhead and maximizes throughput, leveraging Chevin Technology's advanced design expertise to minimize signal interference and processing delays. Its seamless integration with both AMD and Intel FPGA platforms makes it versatile for a variety of implementations across industry sectors. Moreover, it's designed to maintain optimal performance while managing high data loads, showcasing a consistent ability to handle extensive network traffic efficiently.
The HOTLink II Product Suite by Great River Technology is tailored for mission-critical avionics systems requiring robust data communication. It enables seamless data transfer and ensures consistent performance under high-stress operational environments. This suite incorporates advanced technologies to handle complex data streams effectively. It includes component options that enhance data throughput and communication efficiency, meeting stringent industry standards for avionics platforms. Designed with precision, the HOTLink II suite supports the integration and management of large datasets, ensuring that avionics systems can perform efficiently and reliably, crucial for modern aircraft and defense applications.
The agileDAC is a digital-to-analog converter that uses a traditional capacitive DAC architecture. The agileDAC uses its own internal reference voltage. The architecture can achieve up to 10-bit resolution at sample rates up to 16 MSPS. Agile Analog designs are based on tried and tested architectures to ensure reliability and functionality. Our automated design methodology is programmatic, systematic and repeatable leading to analog IP that is more verifiable, more robust and more reliable. Our methodology also allows us to quickly re-target our IP to different process options. Our highly configurable and multi-node analog IP products are developed to meet the customer’s exact requirements. These digitally-wrapped and verified solutions can be seamlessly integrated into any SoC, significantly reducing complexity, time and costs.
The Chipchain C100 is a pioneering solution in IoT applications, providing a highly integrated single-chip design that focuses on low power consumption without compromising performance. Its design incorporates a powerful 32-bit RISC-V CPU which can reach speeds up to 1.5GHz. This processing power ensures efficient and capable computing for diverse IoT applications. This chip stands out with its comprehensive integrated features including embedded RAM and ROM, making it efficient in both processing and computing tasks. Additionally, the C100 comes with integrated Wi-Fi and multiple interfaces for transmission, broadening its application potential significantly. Other notable features of the C100 include an ADC, LDO, and a temperature sensor, enabling it to handle a wide array of IoT tasks more seamlessly. With considerations for security and stability, the Chipchain C100 facilitates easier and faster development in IoT applications, proving itself as a versatile component in smart devices like security systems, home automation products, and wearable technology.
The MVPM100 series brings forth cutting-edge microsystem technology to measure particulate matter precisely in a compact module. Distinguished from traditional bulky sensors, it directly measures particle mass instead of relying on optical estimates, providing enhanced accuracy. This makes it optimal for diverse applications demanding precise air quality assessments.\n\nIts compact form factor, alongside its low power consumption, ensures suitability for a wide range of industrial and consumer products. Its capability to monitor particulate matter with high accuracy and over extensive temperature ranges makes it highly desirable for health and environmental applications.\n\nProviding interfaces through I2C and UART, the sensors facilitate easy integration into complex systems, maintaining a balance between performance and power efficiency. Designed for robustness, they are adaptable across varied consumer, medical, and industrial environments, verifying air quality with a high degree of precision.
Advanced Silicon's Sensing Integrated Circuits are engineered for exceptional performance in diverse sensor systems, ranging from photo-diode based detectors to low-noise pixel arrays for photon detection. These ICs leverage multi-channel configurations with integrated per channel analog-to-digital conversion, providing superb noise specs, ADC linearity, and resolution. This makes them ideal for use in digital X-ray systems, CT and PET scanners, particle detectors, and even fingerprint detection solutions. By enhancing integration and performance while minimizing size and power consumption, these products empower highly efficient and advanced sensor applications.
The RayCore MC is a revolutionary real-time path and ray-tracing GPU designed to enhance rendering with minimal power consumption. This GPU IP is tailored for real-time applications, offering a rich graphical experience without compromising on speed or efficiency. By utilizing advanced ray-tracing capabilities, RayCore MC provides stunning visual effects and lifelike animations, setting a high standard for quality in digital graphics. Engineered for scalability and performance, RayCore MC stands out in the crowded field of GPU technologies by delivering seamless, low-latency graphics. It is particularly suited for applications in gaming, virtual reality, and the burgeoning metaverse, where realistic rendering is paramount. The architecture supports efficient data management, ensuring that even the most complex visual tasks are handled with ease. RayCore MC's architecture supports a wide array of applications beyond entertainment, making it a vital tool in areas such as autonomous vehicles and data-driven industries. Its blend of power efficiency and graphical prowess ensures that developers can rely on RayCore MC for cutting-edge, resource-light graphic solutions.
Ncore Cache Coherent Interconnect is designed to tackle the multifaceted challenges in multicore SoC systems by introducing heterogeneous coherence and efficient cache management. This NoC IP optimizes performance by ensuring high throughput and reliable data transmission across multiple cores, making it indispensable for sophisticated computing tasks. Leveraging advanced cache coherency, Ncore maintains data integrity, crucial for maintaining system stability and efficiency in operations involving heavy computational loads. With its ISO26262 support, it caters to automotive and industrial applications requiring high reliability and safety standards. This interconnect technology pairs well with diverse processor architectures and supports an array of protocols, providing seamless integration into existing systems. It enables a coherent and connected multicore environment, enhancing the performance of high-stakes applications across various industry verticals, from automotive to advanced computing environments.
ASIC North's Pipeline ADCs are designed to offer high-resolution, fast sampling, making them ideal for applications requiring precision and speed. These converters feature a pipeline architecture that enhances throughput and reduces latency, ensuring data integrity in high-performance applications. They are particularly suited for use in communications, imaging, and audio processing where maintaining signal fidelity is critical. ASIC North's expertise in mixed-signal processes ensures these ADCs deliver exemplary performance across a range of settings.
DigiLens' Waveguide Optics for XR/AR are at the cutting edge of visual display technology, engineered to transform how digital data overlays onto the real world. These waveguides are crafted from DigiLens' proprietary CrystalClear material, which is the culmination of intensive R&D aimed at optimizing optical clarity and performance. The waveguides are tailored for integration into smartglasses, smart helmets, and XR devices, providing unmatched brightness and image quality. The Crystal Waveguides are designed for a seamless user experience across diverse applications, from consumer electronics to industrial and enterprise solutions. Thanks to their unique material properties and sophisticated manufacturing processes, these waveguides achieve ultra-low eye glow and enhanced optical efficiency, ensuring that digital overlays appear remarkably vibrant yet naturally integrated into the user's view. Furthermore, DigiLens' robust and scalable manufacturing process enables the rapid production of these high-performance waveguides. Their ability to retain quality while scaling up production is a testament to DigiLens' leadership in the AR field, allowing partners to create compelling XR experiences that fit seamlessly into everyday life and work scenarios.
The High-Speed Phase-Locked Loop (PLL) is a versatile frequency synthesizer designed to accommodate a broad range of applications. Offering a clock frequency range from 100 MHz to 350 MHz, with VCO capabilities extending up to 3.2 GHz, this PLL ensures precise timing synchronization essential for high-speed data communications and processing. By providing output frequencies ranging from 300 MHz to 3.2 GHz, this PLL is ideal for optimizing performance in sophisticated electronic systems, delivering high fidelity and stability across variable operating conditions. Its configurable nature allows for tailored frequency division, supporting both synchronous and source-synchronous setups. Such flexibility and performance make it an indispensable component for enhancing clock system reliability and efficiency in modern digital architectures.
This core is designed for high-performance applications requiring robust Ethernet connectivity with a high data throughput. The 10G Ethernet MAC and PCS solutions are developed to reliably handle speeds up to 10Gbps, optimizing the interface between Ethernet transmission and physical network layers. These IPs provide key functionality that helps maintain efficient data handling and transfer across networks, ensuring minimal latency and maximum productivity. Featuring refined architecture and robust design, this solution integrates seamlessly into FPGA frameworks, especially targeting Intel and AMD platforms. Its compatibility and reliability make it ideal for advanced networking tasks in a broad range of applications—from data centers to complex cloud infrastructures. The efficient management of data streams through this MAC and PCS combination ensures high-speed communication and responsiveness critical to high-demand environments. Its plug-and-play usability allows it to be quickly incorporated into existing systems, providing a flexible solution that maintains the scalability and performance needs of high-end systems. Additionally, Chevin Technology's expertise ensures that these cores come with comprehensive support tailored to enhance product integration and deployment efficiency.
This mmWave PLL is engineered to deliver exceptional performance in high-frequency applications, such as mmWave communications and advanced radar systems. The IP offers remarkable frequency synthesis capabilities, essential for the operation of modern communication networks and sensors, including the growing 5G infrastructure and automotive radar technologies. The design incorporates mechanisms to optimize phase noise and enhance frequency stability, which are critical in minimizing signal distortion in high-bandwidth transmissions. This PLL is compact yet powerful, making it an excellent choice for systems where space and performance are at a premium. Suitable for integration into a variety of RF and mmWave architectures, the mmWave PLL supports applications across telecommunications, automotive, and beyond. It helps designers achieve superior system performance while maintaining low latency and high data throughput.
Silicon Creations' Analog Glue solutions provide essential analog functionalities to complete custom SoC designs seamlessly. These functional blocks, which constitute buffer and bandgap reference circuits, are vital for seamless on-chip clock distribution and ensure low-jitter operations. Analog Glue includes crucial components such as power-on reset (POR) generators and bridging circuits to support various protocols and interfaces within SoCs. These supplementary macros are crafted to complement existing PLLs and facilities like SerDes, securing reliable signal transmission under varied operating circumstances. Serving as the unsung heroes of chip integration, these Analog Glue functions mitigate the inevitable risks of complex SoC designs, supporting efficient design flows and effective population of chip real estate. Thus, by emphasizing critical system coherency, they enhance overall component functionality, providing a stable infrastructure upon which additional system insights can be leveraged.
The DAC solutions provided transform digital signals back into analog form, ensuring high fidelity and accuracy in the conversion process. This is crucial for applications that demand pristine audio outputs or precise control signals. Noteworthy for their minimal power consumption and high resolution, these DACs are suitable for both consumer electronics and professional audio equipment. Their advanced architecture ensures superior performance, enabling end-users to leverage the full potential of digital-to-analog conversion. Engineered for seamless integration into larger systems, they support various output ranges and resolutions to meet specific application demands. With a strong emphasis on maintaining signal integrity, these DACs provide consistent and reliable performance, making them a preferred choice for numerous technological solutions.
HFFx Auto is a high-frequency restoration technology designed to address audio quality degradation resulting from the use of lossy codecs. This technology is incredibly versatile, functioning effectively with both streamed audio-visual content and digital broadcast services. Its adaptability enables seamless adjustment across varying channel bandwidths and is capable of enhancing audio originally constrained by low sampling rates or sources like analogue tapes. Beyond restoration, HFFx Auto aids in up-conversion to higher sampling rates, offering a more open and natural sound experience. This capability makes it an indispensable tool for digital TV and other audio applications where enhancing the clarity and quality of sound is crucial. By automatically restoring bandwidth and compensating for frequency loss, HFFx Auto ensures that audio outputs remain vibrant and true to the original source material.
Silicon Creations offers a diverse suite of PLLs designed for a wide range of clocking solutions in modern SoCs. The Robust PLLs cover an extensive range of applications with their multi-functional capability, adaptable for various frequency synthesis needs. With ultra-wide input and output capabilities, and best-in-class jitter performances, these PLLs are ideal for complex SoC environments. Their construction ensures modest area consumption and application-appropriate power levels, making them a versatile choice for numerous clocking applications. The Robust PLLs integrate advanced designs like Low-Area Integer PLLs that minimize component usage while maximizing performance metrics, crucial for achieving high figures of merit concerning period jitter. High operational frequencies and superior jitter characteristics further position these PLLs as highly competitive solutions in applications requiring precision and reliability. By incorporating innovative architectures, they support precision data conversion and adaptable clock synthesis for systems requiring both integer and fractional-N modes without the significant die area demands found in traditional designs.
The Time-Triggered Protocol (TTP) designed by TTTech is an advanced communication protocol meant to enhance the reliability of data transmission in critical systems. Developed in compliance with the SAE AS6003 standard, this protocol is ideally suited for environments requiring synchronized operations, such as aeronautics and high-stakes energy sectors. TTP allows for precise scheduling of communication tasks, creating a deterministic communication environment where the timing of data exchanges is predictable and stable. This predictability is crucial in eliminating delays and minimizing data loss in safety-critical applications. The protocol lays the groundwork for robust telecom infrastructures in airplanes and offers a high level of system redundancy and fault tolerance. TTTech’s TTP IP core is integral to their TTP-Controller ASICs and is designed to comply with stringent integrity and safety requirements, including those outlined in RTCA DO-254 / EUROCAE ED-80. The versatility of TTP allows it to be implemented across varying FPGA platforms, broadening its applicability to a wide range of safety-critical industrial systems.
The TW330 distortion correction IP is tailored for use in applications requiring dynamic image transformations, such as VR headsets and automotive HUDs. Utilizing GPU-powered technologies, it offers real-time coordinate transformations, distortion corrections, and other modifications up to a resolution of 16K x 16K in both RGB and YUV formats. This IP is crucial for enhancing visual accuracy and display adaptability across varied markets.
Laser Triangulation Sensors offered by Riftek Europe are designed for precise non-contact measurement and position checking. These sensors utilize blue and infrared lasers to measure dimensions and displacements ranging from 2 mm to 2.5 meters. The high frequency of 160 kHz sampling assures quick and accurate data capture with a measurement error as low as +/- 1 um. These sensors are versatile, suitable for a myriad of applications in various industries, from automotive to manufacturing, where precision measurements are critical. They provide robust performance even in demanding conditions due to their high-speed scanning capabilities. With their advanced laser technology, these sensors not only measure but also check run-outs, surface profiles, and deformations of components, providing comprehensive analysis for quality control and process optimization. Their integration into industrial setups enhances productivity and supports effective automation strategies.
The AST 500 and AST GNSS-RF are multifaceted SOC and RF solutions designed for GNSS applications. They support a wide array of constellations such as GPS, GLONASS, NavIC, and others, in multiple frequency bands, enhancing navigation performance. These ICs integrate features like secure boots and data encryption, facilitating robust security measures crucial for sensitive data. The AST GNSS-RF is equipped with capabilities for L1, L2, L5, and S band reception, catering to high-fidelity signal requirements across various applications. The support for dual-band reception ensures that ionosphere errors are minimized, offering exceptional positioning accuracy.
The THOR platform is a versatile tool for developing application-specific NFC sensor and data logging solutions. It incorporates silicon-proven IP blocks, creating a comprehensive ASIC platform suitable for rigorous monitoring and continuous data logging applications across various industries. THOR is designed for accelerated development timelines, leveraging low power and high-security features. Equipped with multi-protocol NFC capabilities and integrated temperature sensors, the THOR platform supports a wide range of external sensors, enhancing its adaptability to diverse monitoring needs. Its energy-efficient design allows operations via energy harvesting or battery power, ensuring sustainability in its applications. This platform finds particular utility in sectors demanding precise environmental monitoring and data management, such as logistics, pharmaceuticals, and industrial automation. The platform's capacity for AES/DES encrypted data logging ensures secure data handling, making it a reliable choice for sectors with stringent data protection needs.
The CC-205 Wideband CMOS Rectifier is engineered for direct interfacing with antennas without the necessity of a matching network, accommodating a rectification range from 6MHz to 5.8GHz. It ensures efficient power conversion with a flexible input power range from -18dBm to over +33dBm, offering conversion efficiencies between 40% and 90%. This rectifier optimizes power transfer through very low return losses, enhancing the applicability in a range of RF environments and systems, thus maximizing efficiency.
ISPido on the VIP Board is tailored for Lattice Semiconductors' Video Interface Platform, providing a runtime solution optimized for delivering crisp, balanced images in real-time. This solution offers two primary configurations: automatic deployment for optimal settings instantly upon startup, and a manual, menu-driven interface allowing users to fine-tune settings such as gamma tables and convolution filters. Utilizing the CrossLink VIP Input Bridge with Sony IMX 214 sensors and an ECP5-85 FPGA, it provides HD output in HDMI YCrCb format, ensuring high-quality image resolution and real-time calibration.
Polar ID from Metalenz offers a cutting-edge face unlock solution, using advanced meta-optic technology to provide secure, high-resolution facial recognition capabilities. It captures the unique "polarization signature" of a human face, making it resistant to both 2D photos and sophisticated 3D masks. Polar ID operates efficiently in a variety of lighting conditions, from bright daylight to dark environments, ensuring its utility extends across all smartphone models without sacrificing security or user experience. This technology replaces complex structured light modules, incorporating a single near-infrared polarization camera and active illumination source. It significantly reduces costs and footprint, supporting a broad adoption across hundreds of millions of mobile devices. With its low price point and high performance, Polar ID elevates smartphone security, offering robust protection for digital transactions and identity verification. By enabling this on an embedded platform with compatibility for Qualcomm's Snapdragon processors, Metalenz ensures widespread applicability. The key advantage of Polar ID is its affordability and ease of integration, as it eliminates the need for larger, more intrusive notches in phone designs. Its sophisticated polarization sensing means secure authentication is possible even if the user wears sunglasses or masks. Polar ID sets a new benchmark in smartphone security by delivering convenience and enhanced protection, marking it as the first polarization sensor available for smartphones.
Join the world's most advanced semiconductor IP marketplace!
It's free, and you'll get all the tools you need to discover IP, meet vendors and manage your IP workflow!
No credit card or payment details required.
Join the world's most advanced AI-powered semiconductor IP marketplace!
It's free, and you'll get all the tools you need to advertise and discover semiconductor IP, keep up-to-date with the latest semiconductor news and more!
Plus we'll send you our free weekly report on the semiconductor industry and the latest IP launches!