All IPs > Automotive
The automotive category of semiconductor IPs is primarily dedicated to addressing the intricacies and demands of modern automotive technology. As vehicles become increasingly sophisticated, integrating more electronic systems and sensors, the need for reliable, efficient, and safe semiconductor IP solutions has never been greater. Our diverse range of automotive semiconductor IPs is designed to meet the needs of various automotive applications, from enhancing communication between vehicle components to ensuring the utmost safety and connectivity.
One essential aspect of this category is the variety of communication protocols needed in automotive systems. This includes the classic Controller Area Network (CAN), which is a robust vehicle bus standard allowing microcontrollers and devices to communicate with each other within a vehicle without a host computer. Modern advancements in this area are represented by CAN-FD and CAN XL, which offer extended data formats and faster communication speeds, crucial for accommodating the growing complexity of in-vehicle networks. Additionally, the inclusion of FlexRay and LIN technologies provides options for higher bandwidth communication and budget-friendly local interconnect networks.
Safety is also a pivotal concern in automotive semiconductor IPs, as exemplified by Safe Ethernet technology. Safe Ethernet enables high-speed communication suitable for applications where safety is critical, such as advanced driver-assistance systems (ADAS) and autonomous driving technologies. These semiconductor IPs are integral in ensuring information is shared accurately and immediately between vital components, thus reducing the room for error and increasing overall vehicle safety.
Overall, the automotive category of semiconductor IPs offers essential tools for developing vehicles that are not only connected and efficient but also highly safe and reliable. Whether you’re working on enhancing the internal communications of a vehicle, implementing advanced safety systems, or developing new technologies for the networked, autonomous vehicles of tomorrow, our automotive semiconductor IP catalog has the resources you need to succeed.
KPIT is pioneering advancements in autonomous driving and ADAS, providing innovative solutions to address formidable challenges in vehicle autonomy. The technology focuses on enabling Level 3 and beyond autonomy by overcoming obstacles such as safety benchmarks, feature development, and AI capabilities. KPIT seeks to close the gap in validation techniques by offering robust frameworks that encompass a wide range of driving scenarios, ensuring comprehensive and accurate system testing. Integrating AI-driven solutions, the IP bolsters autonomous capability beyond mere perception, ensuring that automakers can deliver vehicles safety-compliant and consumer-ready.
The aiWare NPU (Neural Processing Unit) by aiMotive is a high-performance hardware solution tailored specifically for automotive AI applications. It is engineered to accelerate inference tasks for autonomous driving systems, ensuring excellent performance across a variety of neural network workloads. aiWare delivers significant flexibility and efficiency, capable of scaling from basic Level 2 applications to complex multi-sensor Level 3+ systems. Achieving up to 98% efficiency, aiWare's design focuses on minimizing power utilization while maximizing core performance. It supports a broad spectrum of neural network architectures, including convolutional neural networks, transformers, and recurrent networks, making it suitable for diverse AI tasks in the automotive sphere. The NPU's architecture allows for minimal external memory access, thanks to its highly efficient dataflow design that capitalizes on on-chip memory caching. With a robust toolkit known as aiWare Studio, engineers can efficiently optimize neural networks without in-depth knowledge of low-level programming, streamlining development and integration efforts. The aiWare hardware is also compatible with V2X communication and advanced driver assistance systems, adapting to various operational needs with great dexterity. Its comprehensive support for automotive safety standards further cements its reputation as a reliable choice for integrating artificial intelligence into next-generation vehicles.
TTTech's Time-Triggered Ethernet (TTEthernet) is a breakthrough communication technology that combines the reliability of traditional Ethernet with the precision of time-triggered protocols. Designed to meet stringent safety requirements, this IP is fundamental in environments where fail-safe operations are absolute, such as human spaceflight, nuclear facilities, and other high-risk settings. TTEthernet integrates seamlessly with existing Ethernet infrastructure while providing deterministic control over data transmission times, allowing for real-time application support. Its primary advantage lies in supporting triple-redundant networks, which ensures dual fault-tolerance, an essential feature exemplified in its use by NASA's Orion spacecraft. The integrity and precision offered by Time-Triggered Ethernet make it ideal for implementing ECSS Engineering standards in space applications. It not only permits robust redundancy and high bandwidth (exceeding 10 Gbps) but also supports interoperability with various commercial off-the-shelf components, making it a versatile solution for complex network architectures.
AndesCore Processors offer a robust lineup of high-performance CPUs tailored for diverse market segments. Employing the AndeStar V5 instruction set architecture, these cores uniformly support the RISC-V technology. The processor family is classified into different series, including the Compact, 25-Series, 27-Series, 40-Series, and 60-Series, each featuring unique architectural advances. For instance, the Compact Series specializes in delivering compact, power-efficient processing, while the 60-Series is optimized for high-performance out-of-order execution. Additionally, AndesCore processors extend customization through Andes Custom Extension, which allows users to define specific instructions to accelerate application-specific tasks, offering a significant edge in design flexibility and processing efficiency.
The EW6181 is an advanced multi-GNSS silicon solution designed for high sensitivity and precision. This powerful chip supports GPS, Glonass, BeiDou, Galileo, SBAS, and A-GNSS, offering integration flexibility with various applications. Its built-in RF frontend and digital baseband facilitate robust signal processing, controlled by an ARM MCU. The EW6181 integrates essential interfaces for diverse connectivity, matched with DC-DC converters and LDOs to minimize BOM in battery-driven setups. This silicon marries low power demands with strong functional capabilities, thanks to proprietary algorithms that optimize its operation. It’s engineered to deliver exceptional accuracy and sensitivity in both standalone and cloud-related environments, adapting smoothly to connected ecosystems for enhanced efficiency. Its compact silicon footprint further enhances its suitability for applications needing prolonged battery life and reliable positioning. With a focus on Antenna Diversity, the EW6181 shines in dynamic applications like action cameras and smartwatches, ensuring clear signal reception even when devices rapidly rotate. This aspect accentuates the chip's ability to maintain consistent performance across a range of challenging environments, reinforcing its role in the forefront of GNSS technology.
aiSim 5 is a state-of-the-art automotive simulation platform designed for ADAS and autonomous driving testing. Recognized as the world's first ISO26262 ASIL-D certified simulator, it offers unparalleled accuracy and determinism in simulating various driving scenarios and environmental conditions. The simulator integrates AI-based digital twin technology and an advanced rendering engine to create realistic traffic scenarios, helping engineers verify and validate driver assistance systems. Harnessing powerful physics-based simulation capabilities, aiSim 5 replicates real-world phenomena like weather effects and complex traffic dynamics with precision. By offering a comprehensive set of 3D assets and scenarios, it allows for the extensive testing of systems in both typical and edge conditions. With its flexible and open architecture, aiSim 5 can seamlessly integrate into existing testing toolchains, supporting significant variations in sensor configurations and driving algorithms. The platform encourages innovation in simulation methodologies by providing tools for scenario randomization and synthetic data generation, crucial for developing resilient ADAS applications. Additionally, its cloud-ready architecture makes it applicable across various hardware platforms, turning simulation into a versatile resource available on inexpensive or high-end computing configurations alike.
The Digital PreDistortion (DPD) Solution offered by Systems4Silicon is a versatile technology aimed at significantly enhancing the efficiency of RF power amplifiers. This advanced sub-system is scalable and adaptable to both ASIC and FPGA platforms, ensuring broad compatibility across various device vendors. The DPD solution meticulously enhances linearity, crucial for devices operating within multi-standard environments, such as 5G and O-RAN systems.\n\nDesigned to optimize the signal processing in transmission systems, this DPD technology allows for considerable power savings by enabling amplifiers to function more efficiently. Systems4Silicon’s approach ensures that the system can maintain its performance across different transmission bandwidths, which can scale to 1 GHz or higher. This makes it particularly valuable for large-scale and high-frequency applications.\n\nThe DPD technology's implementation is straightforward, providing a field-proven solution that integrates seamlessly with current infrastructures. Its adaptability is not merely limited to the hardware spectrum but extends to accommodate evolving communication standards, ensuring it remains relevant and effective in diverse market scenarios.
Bluespec's Portable RISC-V Cores are designed to bring flexibility and extended functionality to FPGA platforms such as Achronix, Xilinx, Lattice, and Microsemi. They offer support for operating systems like Linux and FreeRTOS, making them versatile for various applications. These cores are accompanied by standard open-source development tools, which facilitate seamless integration and development processes. By utilizing these tools, developers can modify and enhance the cores to suit their specific needs, ensuring a custom fit for their projects. The portable cores are an excellent choice for developers looking to deploy RISC-V architecture across different FPGA platforms without being tied down to proprietary solutions. With Bluespec's focus on open-source, users can experience freedom in innovation and development without sacrificing performance or compatibility.
The CANmodule-III is a sophisticated full CAN controller designed to handle communication on the CAN bus with outstanding efficiency. Built upon Bosch's fundamental CAN architecture, this module is fully CAN 2.0B compliant, facilitating seamless communication transactions across the network. It is optimized for system-on-chip integrations, providing customizable options to cater to specific application requirements. The module stands out with its inherited functions which ensure uninterrupted main core operations, even when additional functionalities are layered around it. Having been deployed in various applications from aerospace to industrial control, the CANmodule-III's proven reliability makes it a preferred choice for developers seeking robust communication solutions in FPGA and ASIC technologies.
Ncore Cache Coherent Interconnect is designed to tackle the multifaceted challenges in multicore SoC systems by introducing heterogeneous coherence and efficient cache management. This NoC IP optimizes performance by ensuring high throughput and reliable data transmission across multiple cores, making it indispensable for sophisticated computing tasks. Leveraging advanced cache coherency, Ncore maintains data integrity, crucial for maintaining system stability and efficiency in operations involving heavy computational loads. With its ISO26262 support, it caters to automotive and industrial applications requiring high reliability and safety standards. This interconnect technology pairs well with diverse processor architectures and supports an array of protocols, providing seamless integration into existing systems. It enables a coherent and connected multicore environment, enhancing the performance of high-stakes applications across various industry verticals, from automotive to advanced computing environments.
The Time-Triggered Protocol (TTP) designed by TTTech is an advanced communication protocol meant to enhance the reliability of data transmission in critical systems. Developed in compliance with the SAE AS6003 standard, this protocol is ideally suited for environments requiring synchronized operations, such as aeronautics and high-stakes energy sectors. TTP allows for precise scheduling of communication tasks, creating a deterministic communication environment where the timing of data exchanges is predictable and stable. This predictability is crucial in eliminating delays and minimizing data loss in safety-critical applications. The protocol lays the groundwork for robust telecom infrastructures in airplanes and offers a high level of system redundancy and fault tolerance. TTTech’s TTP IP core is integral to their TTP-Controller ASICs and is designed to comply with stringent integrity and safety requirements, including those outlined in RTCA DO-254 / EUROCAE ED-80. The versatility of TTP allows it to be implemented across varying FPGA platforms, broadening its applicability to a wide range of safety-critical industrial systems.
The eSi-ADAS suite from EnSilica is a tailored collection of radar accelerator IPs designed to enhance automotive, drone, and UAV systems through advanced radar co-processing capabilities. This IP facilitates superior performance and enhanced situational awareness, crucial for applications requiring rapid and responsive decision-making. It merges cutting-edge radar technology with automotive standards, providing a robust platform for developing state-of-the-art driver assistance systems.\n\nThe suite’s radar co-processor engine is integral to improving radar system capabilities, ensuring that all signals are processed efficiently and accurately. This not only boosts the overall performance of radar systems but also aids in minimizing integration risks, streamlining the development process.\n\nFurthermore, eSi-ADAS supports various radar applications, enhancing safety and automation within the automotive sector. Its adaptability to UAV and drone designs also marks it as a versatile solution for unmanned systems, where responsiveness and precision are key.
The RISCV SoC developed by Dyumnin Semiconductors is engineered with a 64-bit quad-core server-class RISCV CPU, aiming to bridge various application needs with an integrated, holistic system design. Each subsystem of this SoC, from AI/ML capabilities to automotive and multimedia functionalities, is constructed to deliver optimal performance and streamlined operations. Designed as a reference model, this SoC enables quick adaptation and deployment, significantly reducing the time-to-market for clients. The AI Accelerator subsystem enhances AI operations with its collaboration of a custom central processing unit, intertwined with a specialized tensor flow unit. In the multimedia domain, the SoC boasts integration capabilities for HDMI, Display Port, MIPI, and other advanced graphic and audio technologies, ensuring versatile application across various multimedia requirements. Memory handling is another strength of this SoC, with support for protocols ranging from DDR and MMC to more advanced interfaces like ONFI and SD/SDIO, ensuring seamless connectivity with a wide array of memory modules. Moreover, the communication subsystem encompasses a broad spectrum of connectivity protocols, including PCIe, Ethernet, USB, and SPI, crafting an all-rounded solution for modern communication challenges. The automotive subsystem, offering CAN and CAN-FD protocols, further extends its utility into automotive connectivity.
The TSN Switch for Automotive Ethernet is designed to address the needs of modern automotive networks by offering time-sensitive networking capabilities. This switch is tailored to manage Ethernet-based communication in vehicles, ensuring low-latency and reliable data transmission. It supports complex automotive network architectures, making it ideal for real-time communication requirements in vehicles. With its robust time-sensitive networking features, this switch is capable of guaranteeing data delivery within tight time constraints, a critical requirement for advanced driver assistance systems (ADAS) and autonomous driving. It integrates seamlessly within the automotive Ethernet ecosystem, providing scalability and integration flexibility. The switch is engineered to support the industry's move towards centralized vehicle networking, improving data throughput and reducing cabling complexity. The switch’s architecture supports multiple ports, allowing for the connection of various vehicle subsystems within a unified network framework. Implementing this technology can drastically improve the efficiency and reliability of in-vehicle communication systems. The TSN capabilities optimize network traffic management, ensure the prioritization of time-critical messages, and enhance the overall stability and predictability of automotive data flows.
D2D® Technology, developed by ParkerVision, is a revolutionary approach to RF conversion that transforms how wireless communication operates. This technology eliminates traditional intermediary stages, directly converting RF signals to digital data. The result is a more streamlined and efficient communication process that reduces complexity and power consumption. By bypassing conventional analog-to-digital conversion steps, D2D® achieves higher data accuracy and reliability. Its direct conversion approach not only enhances data processing speeds but also minimizes energy usage, making it an ideal solution for modern wireless devices that demand both performance and efficiency. ParkerVision's D2D® technology continues to influence a broad spectrum of wireless applications. From improving the connectivity in smartphones and wearable devices to optimizing signal processing in telecommunication networks, D2D® is a cornerstone of ParkerVision's technological offerings, illustrating their commitment to advancing communication technology through innovative RF solutions.
LightningBlu is a state-of-the-art multi-gigabit connectivity solution for high-speed rail networks, delivering continuous high-speed data transfer between trackside and train systems. This innovative solution works within the mmWave spectrum of 57-71 GHz and is certified for long-term, low-maintenance deployment. It seamlessly integrates with existing trackside networks to provide a stable, high-capacity communication bridge essential for internet access, entertainment, and real-time information services aboard high-speed trains. The LightningBlu system includes robust trackside nodes and compact train-top nodes designed for seamless installation, significantly enhancing operational efficiencies and passenger experience by providing internet speeds superior to traditional mobile broadband services. With aggregate throughputs reaching around 3 Gbps, LightningBlu sets the standard for rail communications by supporting speeds at which data demands are met with ease. Crucially, LightningBlu is a key component in transforming the railway telecommunications landscape, offering upgraded technology that enables uninterrupted and enhanced passenger digital services even in the busiest railways across the UK and USA. Through its advanced mmWave technology, it ensures that the connectivity needs of the modern commuter are met consistently and effectively, paving the way for a new era in transit communication.
The Network Protocol Accelerator Platform (NPAP) is engineered to accelerate network protocol processing and offload tasks at speeds reaching up to 100 Gbps when implemented on FPGAs, and beyond in ASICs. This platform offers patented and patent-pending technologies that provide significant performance boosts, aiding in efficient network management. With its support for multiple protocols like TCP, UDP, and IP, it meets the demands of modern networking environments effectively, ensuring low latency and high throughput solutions for critical infrastructure. NPAP facilitates the construction of function accelerator cards (FACs) that support 10/25/50/100G speeds, effectively handling intense data workloads. The stunning capabilities of NPAP make it an indispensable tool for businesses needing to process vast amounts of data with precision and speed, thereby greatly enhancing network operations. Moreover, the NPAP emphasizes flexibility by allowing integration with a variety of network setups. Its capability to streamline data transfer with minimal delay supports modern computational demands, paving the way for optimized digital communication in diverse industries.
Specially engineered for the automotive industry, the NA Class IP by Nuclei complies with the stringent ISO26262 functional safety standards. This processor is crafted to handle complex automotive applications, offering flexibility and rigorous safety protocols necessary for mission-critical transportation technologies. Incorporating a range of functional safety features, the NA Class IP is equipped to ensure not only performance but also reliability and safety in high-stakes vehicular environments.
The RFicient chip is designed for the Internet of Things (IoT) applications, famously recognized for its ultra-low-power operations. It aims to innovate the IoT landscape by offering a highly efficient receiver technology that significantly reduces power consumption. This chip supports energy harvesting to ensure sustainable operation and contributes to green IoT development by lessening the dependency on traditional power sources. Functionally, the RFicient chip enhances IoT devices' performance by providing cutting-edge reception capabilities, which allow for the consistent and reliable transmission of data across varied environments. This robustness makes it ideal for applications in industrial IoT settings, including smart cities and agricultural monitoring, where data integrity and longevity are crucial. Technically advanced, the RFicient chip's architecture employs intelligent design strategies that leverage low-latency responses in data processing, making it responsive and adaptable to rapid changes in its operational environment. These characteristics position it as a versatile solution for businesses aiming to deploy IoT networks with minimal environmental footprint and extended operational lifespan.
ISELED Technology is an innovative solution for automotive lighting, integrating smart RGB LED control and communication capabilities into compact, efficient modules. These modules support precise color calibration and temperature compensation, leveraging a digital communication protocol to ensure consistent lighting quality. The system is engineered to facilitate seamless integration into automotive lighting applications, enhancing aesthetic appeal and operational efficiency.
OneNav presents the innovative L5-direct GNSS Receiver, a specialized component drawing focus to accuracy and reliability by operating independently of the L1 signal. Leveraging L5 Band signals, this receiver captures and maintains precise location data while ensuring protection against signal jamming. Incorporating a single RF chain, the system reduces redundancy and facilitates optimal antenna placement to enhance device designs in space-restricted environments. This approach critically lowers system costs while delivering robust, reliable location tracking ideal for wearables and IoT applications. The L5-direct receiver integrates seamlessly across multiple satellite constellations like GPS, Galileo, QZSS, and BeiDou, delivering accurate data regardless of environmental constraints. Its refinement in multipath error reduction through machine learning ensures the most precise data acquisition, even in dense urban landscapes. Enhanced with Application Specific Array Processor, the receiver accelerates signal acquisition without sacrificing time or power, ensuring reliable operation wherever used. Additionally, L5-direct GNSS stands out by optimizing power usage, with solutions designed specifically for extended battery life in ultra-low-power devices. Its adaptability allows for integration into diverse systems, serving industries with requirements across different geographies or use cases—from standalone GNSS ASICs to flexible modems and application processors. Featuring silicon-proven capabilities, such as a hot start fix in under one second and open-sky accuracy within 1.5 meters, L5-direct GNSS leads the way for next-generation technology in critical mission deployments.
The 8b/10 Decoder by Roa Logic is a comprehensive implementation of the 8b/10b encoding scheme developed by Widmer and Franaszek. This decoder offers a full solution that automates special comma detection and identifies K28.5 characters, which is essential for maintaining data integrity during transmission. It is designed for environments where precise data decoding is crucial, supporting seamless data transfer across various communication interfaces. This decoder ensures high accuracy in data interpretation by meticulously translating encoded bitstreams back to their original data form. Crafted with precision, it facilitates reliable data communication while reducing error rates during transmission. It is ideally suited for applications requiring error-free data exchange, where decoding accuracy is paramount. Supporting a range of protocols that utilize the 8b/10b scheme, the decoder’s robust design ensures compatibility and reliable performance. Its straightforward integration supports developers in creating efficient platforms for data handling, reinforcing the reliability of communication systems at large.
The DB9000AXI Display Controller is engineered to interface seamlessly with Frame Buffer Memory via the AMBA AXI protocol, offering support for a wide range of display resolutions from basic QVGA up to advanced 8K panels. Besides baseline display capabilities, advanced versions feature enhanced processing attributes such as multiple overlay windows, hardware cursor functions, and high dynamic range (HDR) imaging. With features like Color Space Conversion and programmable resolution settings, this IP core meets diverse display demands across numerous applications.
ArrayNav is at the forefront of GNSS enhancements, utilizing multiple antennas to improve the sensitivity and performance of navigation systems. This sophisticated technology significantly boosts GNSS accuracy in challenging environments such as urban canyons. By leveraging up to four antennas, ArrayNav mitigates multipath issues and strengthens signal reception, dramatically enhancing performance. The heart of ArrayNav's innovation lies in its ability to filter out unwanted signals like interference or jamming attempts, ensuring the precision of GNSS operations. As each antenna adds unique benefits, this system ensures reliable navigation across diverse scenarios, whether in open areas or densely constructed urban landscapes. ArrayNav's technology is pivotal in the automotive sector, especially within advanced driver-assistance systems (ADAS). By providing sharper, more reliable positioning data, it contributes to improved safety and efficiency in vehicular systems, showcasing its indispensable role in modern navigation.
This technology leverages the strengths of both Silicon-Germanium (SiGe) and BiCMOS processes to produce highly efficient RF solutions. SiGe BiCMOS technology is particularly advantageous for its performance in high-frequency applications, making it ideal for RF and wireless communication technologies. The integration of BiCMOS allows for the combination of bipolar and CMOS transistors on a single chip, enhancing the capacity for analog signal processing alongside digital logic. The SiGe component offers a significant advantage in terms of speed and frequency, ensuring high-performance operation suitable for cutting-edge communication standards. By merging these technologies, the process achieves low-noise amplification and superior linearity, which are crucial for advanced telecommunication systems and data transfer technologies. This makes it a go-to choice for various industries, including aerospace and defense, where precision signal processing is paramount. Additionally, the technology comes with a comprehensive suite of design kits that facilitate seamless integration with existing systems. These kits provide everything from standard libraries to bespoke IP configurations, helping customers tailor their solutions efficiently and effectively. The flexibility and performance it offers make this technology a standout in the realm of RF engineering, addressing the needs of high-speed communication infrastructure.
This technology represents a significant innovation in the field of wireless energy transfer, allowing for the efficient transmission of power without physical connections or radiation. By leveraging magnetic resonance, this non-radiative energy transfer system can power devices over distances with high efficiency. It's designed to be safe and environmentally friendly, avoiding the pitfalls of electromagnetic radiation while maintaining a high level of power transfer efficiency. The technology finds its applications in various sectors, including consumer electronics, automotive, and industrial applications where it provides a seamless and reliable solution to power transfer needs. The system's capability to transfer power efficiently without contact makes it ideal for scenarios where traditional power connections might be impractical or inconvenient, enabling new levels of convenience and flexibility for users. Designed to integrate smoothly with existing infrastructure, this energy transfer system can significantly reduce reliance on traditional charging methods, paving the way for more innovative and sustainable energy solutions. Furthermore, the system's architecture is geared towards scalability and adaptability, making it suitable for a wide range of devices and use cases.
This RF transceiver is a versatile solution designed for effective communication in the Sub-GHz frequency bands, specifically 433, 868, and 915 MHz. Ideal for global applications, it adheres to the IEEE 802.15.4-2015 standard, ensuring compatibility with many existing wireless systems. With a data rate capability ranging from 128 kbps for both Rx and Tx to over 3+ Mbps for transmission, it supports robust connectivity in various environments. The transceiver stands out with its high integration, featuring an on-chip RF subsystem that eliminates the need for external radio chips, simplifying system architecture. Its built-in voltage regulators and bandgap reference enhance ease of integration into system designs. Notably, this transceiver supports modulation schemes such as GFSK, BPSK, and O-QPSK, offering flexibility for custom protocol development. Designed to operate efficiently across process nodes, the transceiver supports a wide range of foundries, making it a versatile option for diverse applications. With a transmit power range from -20 to +8 dBm and sensitivity levels reaching down to -106 dBm, it is engineered to assure reliable long-range communication without relying on complex mesh network setups. This simplifies the deployment in scenarios like smart metering where indoor and outdoor connectivity is critical.
hellaPHY Positioning Solution is an advanced edge-based software that significantly enhances cellular positioning capabilities by leveraging 5G and existing LTE networks. This revolutionary solution provides accurate indoor and outdoor location services with remarkable efficiency, outperforming GNSS in scenarios such as indoor environments or dense urban areas. By using the sparsest PRS standards from 3GPP, it achieves high precision while maintaining extremely low power and data utilization, making it ideal for massive IoT deployments. The hellaPHY technology allows devices to calculate their location autonomously without relying on external servers, which safeguards the privacy of the users. The software's lightweight design ensures it can be integrated into the baseband MCU or application processors, offering seamless compatibility with existing hardware ecosystems. It supports rapid deployment through an API that facilitates easy integration, as well as Over-The-Air updates, which enable continuous performance improvements. With its capability to operate efficiently on the cutting edge of cellular standards, hellaPHY provides a compelling cost-effective alternative to traditional GPS and similar technologies. Additionally, its design ensures high spectral efficiency, reducing strain on network resources by utilizing minimal data transmission, thus supporting a wide range of emerging applications from industrial to consumer IoT solutions.
The TSP1 is an innovative neural network accelerator chip developed by ABR, designed to advance AI capabilities in battery-powered devices. It supports sophisticated applications such as natural voice interfaces and biosignal classification, demonstrating efficient data handling and low power consumption. This chip is engineered to process sensor signals robustly and independently, which enables highly efficient, state-space networks suitable for diverse applications. Benefiting from ABR's pioneering Legendre Memory Unit (LMU) state-space model, the TSP1 represents a new frontier in data processing efficiency, boasting remarkable power savings. This AI chip is tailored for edge computing contexts, proving itself ideal for applications like AR/VR, wearable technology, and smart home setups. With the TSP1, users can expect quick AI inference times, around 20 milliseconds, while maintaining secure on-chip storage and offering interfaces for multi-sensor inputs. The powerful combination of state-space networks and custom-tailored hardware optimization ensures the TSP1 leads in both scalability for large AI models and energy-aware performance for various sectors, including IoT and industrial applications.
The PCD03D Turbo Decoder is adept at handling multiple state decoding for standards such as DVB-RCS and IEEE 802.16 WiMAX. Its core design features an 8-state duobinary decoding structure, facilitating precise and quick signal deconstruction. Additionally, the optional inclusion of a 64-state Viterbi decoder enhances versatility and performance in various environments. This decoder is tailored for applications where agility and high data throughput are critical, making it an invaluable asset in wireless communication infrastructures. The decoder’s architecture supports expansive VHDL core integration, providing durable solutions across FPGA platforms.
The SafeIP™ SinglePHY is a pioneering solution in the realm of safe communication technology. Designed to provide 100 MBit/s bandwidth, it balances high performance with a compact form factor and exceptionally low power consumption. The core functionalities of SinglePHY include advanced features like Open Alliance TC10 Sleep/Wake capability, streaming of debug data, and the ability to halt data transmission to maintain a safe operating state. Further, it includes comprehensive diagnostics for cable faults and a built-in self-test for logic verification. These capabilities make it ideal for automotive applications that demand high reliability. This IP also integrates a range of interfaces, from Media Independent Interfaces to APB and IEEE 1500 interfaces, ensuring robust data exchange and configuration capabilities. It is recognized for its rigorous compliance with numerous standards, including the Open Alliance and IEEE 802.3, ensuring seamless industry integration. With a footprint of 0.900mm x 0.630mm, it offers a small yet powerful solution optimized for the automotive industry's stringent requirements. SafeIP™ SinglePHY is built on the GlobalFoundries 22FDX platform, capitalizing on the node's high-performance computing and ultra-low leakage. Its energy consumption is notably low at just 34mW, underscoring its efficiency. Moreover, this PHY adheres strictly to EMC compliance standards, both in conducted and radiated emissions, securing its position as an industry-leading solution for automotive-grade Ethernet communication.
Time-Sensitive Networking (TSN) from TTTech represents a significant advancement in industrial communication, offering precise timing and deterministic data delivery across network systems. This IP aids sectors ranging from aerospace to automotive by providing robust time-synchronization and schedule-aware communication networks. The core advantage of TSN lies in its detailed timing protocols, including time synchronization (IEEE 802.1AS), time-aware scheduling (IEEE 802.1Qbv), and frame replication (IEEE 802.1CB), ensuring that critical data packets are transmitted with high precision and reliability. These characteristics render TSN an essential component for applications requiring uninterrupted and synchronized data flows, especially in autonomous industrial automation and vehicular network systems. TTTech's TSN solutions extend across several domains; they are available for microcontrollers, SoCs, and network switches, offering flexible and scalable integration capabilities. The solution is reinforced by a comprehensive software stack and network scheduling tools, enhancing its applicability in designing next-generation connected systems.
The CAN 2.0/CAN FD Controller offered by Synective Labs is a comprehensive CAN controller suitable for integration into both FPGAs and ASICs. This controller is fully compliant with the ISO 11898-1:2015 standard, supporting both traditional CAN and the more advanced CAN FD protocols. The CAN FD protocol enhances the original CAN capabilities by transmitting payloads at increased bitrates up to 10 Mbit/s and accommodating longer payloads of up to 64 bytes compared to the standard 8 bytes. This controller integrates seamlessly with a variety of FPGA devices from leading manufacturers such as Xilinx, Altera, Lattice, and Microsemi. It supports native bus interfaces including AXI, Avalon, and APB, making it versatile and highly compatible with various processing environments. For those deploying System on Chip (SOC) type FPGAs, the controller offers robust processor integration options, making it an ideal choice for complex applications. A standout feature of this IP is its focus on diagnostics and CAN bus debugging, which makes it particularly beneficial for applications like data loggers. These diagnostic features can be selectively disabled during the build process to reduce the controller's footprint for more traditional uses. With its low-latency DMA, interrupt rate adaptation, and configurable hardware buffer size, this CAN controller is engineered for high efficiency and flexibility across different applications.
CANmodule-IIIx represents a cutting-edge CAN controller featuring post-modern enhancements for high-performance communication. This advanced controller, while fully adhering to CAN 2.0B standards, boasts 32 receive and 32 transmit mailboxes. Tailored for streamlined integrations, it ensures flexibility and innovation be it an FPGA or an ASIC system. By preserving the core's fundamental function while allowing added wrapping features, the CANmodule-IIIx provides unmatched adaptability without compromising on performance. The module has demonstrated its efficiency in sectors like automotive and telecommunications, ensuring swift data transactions and system reliability across various operational environments.
Specializing in Network-on-Chip (NoC)-based SoC integration, this IP leverages coherent and non-coherent NoC subsystems, crucial for building scalable multi-chip solutions. By integrating several NoC platforms, it offers a robust framework for developing SoCs with enhanced connectivity and performance.
The CANsec Controller Core is engineered to provide enhanced security features for automotive CAN networks. Traditional CAN networks are not inherently secure, posing challenges in protecting against unauthorized access and data tampering. This controller core integrates security protocols directly into the CAN framework, offering an encryption-enabled solution tailored for modern automotive needs. This controller core implements standardized security measures, ensuring confidentiality, integrity, and authenticity of CAN messages. By incorporating advanced cryptographic algorithms, the CANsec Controller Core meets stringent security requirements without compromising the performance that automotive applications demand. Its design focuses on minimizing resource consumption while providing robust security enhancements. Ideal for vehicles requiring secure communication between various electronic control units (ECUs), the core upholds the automotive industry’s increasing emphasis on cybersecurity. The CANsec Controller Core is versatile in its implementation, suitable for both new vehicle architectures and as an upgrade to existing systems, making it a vital component of future-proof automotive design.
The SMS OC-3/12 Transceiver Core is engineered for SONET/SDH applications, providing comprehensive support for OC-3 and OC-12 data rates. This core is designed with a deep sub-micron single poly CMOS architecture to ensure compliance with ANSI, Bellcore, and ITU-T specifications for jitter tolerance and generation.\n\nFeaturing innovative architecture, this transceiver core integrates high-frequency PLLs with on-chip loop filters, reducing external component requirements and simplifying design processes. Proprietary advanced signal processing techniques enhance signal integrity, mitigating external and PCB noise issues that commonly affect traditional transceiver designs.\n\nThe core is optimized for multiport SOC designs, allowing for easy process migration and adaptability for new application domains. It includes custom configurable serializer-deserializer (SERDES) options, further enhancing its suitability for complex system integrations and high-performance requirements in networking infrastructure.
The PCE04I Inmarsat Turbo Encoder is engineered to optimize data encoding standards within satellite communications. Leveraging advanced state management, it enhances data throughput by utilizing a 16-state encoding architecture. This sophisticated development enables efficient signal processing, pivotal for high-stakes communication workflows. Furthermore, the PCE04I is adaptable across multiple frameworks, catering to diverse industry requirements. Innovation is at the forefront with the option of integrating additional state Viterbi decoders, tailoring performance to specific needs and bolstering reliability in communications.
The GDP-XL Design Management System by IC Manage is a high-performance, global solution designed for seamless design and IP management. It excels in providing a robust framework for collaboration across single and multiple design sites, integrating teams in different locations securely and efficiently. This system is particularly valued for its ability to support rigorous control over databases, ensuring the accuracy and consistency required for critical RFIC design processes. With GDP-XL, companies can manage their design data more reliably, addressing challenges commonly faced in semiconductor design environments. It offers enhanced productivity through unrivaled scalability and flexibility, allowing organizations to adapt to ever-changing design requirements without compromise. The system's advanced capabilities are leveraged by top-tier semiconductor companies to maintain a competitive edge in a fast-paced industry. As the industry's leading design data and IP management system, GDP-XL also supports innovative collaboration patterns, enabling seamless sharing and revision control among global teams. Its robust architecture facilitates the integration of various methodologies, aiding companies in efficiently navigating complex designs and maintaining meticulous tracking of their IP assets.
SafeIP™ DualPHY advances safe communication technology by supporting both 100 and 1000 MBit/s Ethernet transmission speeds. Renowned for its robust features, DualPHY integrates seamlessly with system architectures that require flexibility in speed and bandwidth. It includes functionalities for Open Alliance TC10 Sleep/Wake and streaming of debug data, with capabilities for precise error management and cable fault diagnostics. The technology is structured to employ two media-dependent interfaces, alongside a media-independent interface for robust physical layer communication. This is crucial for applications requiring adaptability and precision, especially in automotive settings where tolerance to network failures and sudden disruptions are important. Operating on the GlobalFoundries 22FDX platform enhances its low-voltage and high-performance attributes, positioning it as an appropriate solution for automotive environments. Furthermore, it maintains EMC compliance with standards defined by the Open Alliance, ensuring noise emissions are controlled within acceptable limits. With a typical power consumption of 250mW and dimensions of 1.800mm x 0.850mm, DualPHY combines efficiency with performance to meet the demands of high-speed automotive networking.
Korusys' SMPTE 2059-2 Synchronization solution offers a comprehensive, high-accuracy hardware synchronization for video equipment leveraging IP networks. It generates precise timing signals crucial for both audio and video systems, ensuring seamless integration in professional environments. The solution is fully compliant with IEEE1588v2 standards, and supports both 2059-1 and 2059-2 frameworks, delivering a holistic timing solution through an integrated software and hardware approach.
ARDSoC is a pioneering embedded DPDK solution tailored for ARM-based SoCs, specifically engineered to enhance ARM processor performance by bypassing the traditional Linux network stack. This solution brings the efficiencies of DPDK, traditionally reserved for datacenter environments, into the embedded and MPSoC sphere, extending DPDK functionalities to a broader range of applications. The architecture of ARDSoC allows users to minimize power consumption, decrease latency, and reduce the total cost of ownership compared to conventional x86 solutions. This IP product facilitates packet processing applications and supports various technologies such as VPP, Docker, and Kubernetes, ensuring hardware-accelerated embedded network processing. Designed for integration across Xilinx Platforms, ARDSoC also offers high flexibility with the ability to run existing DPDK programs with minimal modification. It is optimized for performance on ARM A53 and A72 processors, ensuring that data structures are efficiently produced and consumed in hardware, thereby providing robust and reliable network data handling capabilities.
PhantomBlu is a sophisticated mmWave communication solution specifically designed for the defense sector, empowering military operations with robust, high-performance connectivity. Leveraging advanced mmWave technology, it supports tactical connections between land, sea, and air platforms, enabling seamless IP networking over a secure, anti-jam resistant mesh network. PhantomBlu’s design is optimized for rapid deployment and versatile use across various challenging military and defense environments. The PhantomBlu system offers unprecedented connectivity and integration capabilities, supporting high-bandwidth, low-latency communications essential for defense operations. It features LPI (Low Probability of Interception) and LPD (Low Probability of Detection), ensuring stealth and operational security. Its adaptive networking solutions significantly enhance situational awareness and interoperability amongst varied defense assets, assuring seamless transfer of C4ISR data. Whether deployed across large terrains or in mobile units, PhantomBlu's resilience and scalability ensure that defense teams operate with confidence. Its advanced capabilities are critical in mitigating risks and enhancing strategic emission, making it an invaluable asset for modern military communications needs.
The ZIA Stereo Vision technology is crafted for applications that require depth perception and accurate distance measuring. Utilizing stereo vision algorithms, it excels in generating 3D data from dual-camera setups, which is crucial for robots, drones, and autonomous vehicles. By employing advanced disparity mapping techniques, this technology ensures high fidelity in spatial analysis, making it particularly effective in dynamic environments. Its integration optimizes tasks that need real-time 3D depth information, aiding navigation and object placement.
This innovative system is designed to enhance the user experience of wireless power transfer applications by ensuring precise alignment and compatibility between power transmitters and receivers. It includes mechanisms for detecting the positioning of a device relative to a charging source, optimizing the alignment process to ensure efficient energy transfer. The system's compatibility detection capabilities allow it to recognize and adapt to various device specifications and charging standards, reducing the risk of charging errors and improving overall system reliability. With this system, users can achieve optimal alignment automatically, making the process of wireless charging simpler and more intuitive. The technology is particularly beneficial in scenarios where positioning is critical for energy transfer efficiency, such as in automotive or portable device applications. It addresses common challenges in wireless power systems, such as alignment drift and signal path obstructions, ensuring that power is delivered smoothly and consistently.
Deterministic Ethernet is a pivotal technology by TTTech for ensuring precise data communication in critical environments such as aerospace. Certified chip components for Ethernet networking enable the deployment of highly dependable connections, leveraging standards like ARINC 664 Part 7. Widely utilized in TTTech's integrated circuits, this technology facilitates time-triggered Ethernet (TTEthernet) or time-sensitive networking (TSN) connectivity, adding deterministic capabilities to standard Ethernet links. Thanks to its structured timing protocols, Deterministic Ethernet ensures that data packets are delivered with minimal delay variation, vital for applications where timing precision is essential. This predictable data flow enhances the reliability of network communications within avionics, providing the assurance required for safety-critical systems. The technology's implementation in FPGA solutions allows customers to tailor Ethernet integration to their specific system needs, further extending its application beyond the aviation industry to sectors like energy, where robust, high-performance data networks are indispensable.
DapTechnology's FireSpy Bus Analyzer series represents the culmination of extensive R&D in IEEE-1394 and AS5643 standards. These analyzers provide robust tools for analyzing IEEE-1394 networks, offering critical insights into bus transactions. The FireSpy analyzers are engineered to handle different bus configurations, ranging from single to multi-bus setups, making them versatile tools for monitoring and diagnostics across various applications. The FireSpy family of analyzers is designed to support the integration of Mil1394 protocol modules, which is critical for aerospace and defense industries. By delivering in-depth data analysis and high-level diagnostic capabilities, these analyzers help optimize network performance and troubleshoot issues effectively. With the release of their 4th generation, DapTechnology has pushed the boundaries with enhanced functionality and performance, setting a new standard for IEEE-1394 bus analyzers. The FireSpy analyzers excel in versatility and scalability. They cater to a broad spectrum of use cases, equipping users with the means to adapt to diverse testing environments. Incorporating IEEE-1394 protocols with high precision, these devices extend beyond mere analysis, facilitating extensive network simulations and testing, essential for developing reliable, high-performance IEEE-1394 networks.
The FireCore PHY & Link Layer solutions from DapTechnology provide state-of-the-art components crucial for implementing IEEE-1394 and AS5643 standards. Designed for adaptability, these solutions cater to multiple FPGA families, offering a combined PHY and LLC (Link Layer Controller) approach. They efficiently operate across a range of transmission speeds (S100 to S3200), making them valuable assets in various high-speed data environments. FireCore solutions are crafted with a focus on flexibility and reliability. They encompass significant enhancements such as configurable PHY ports, bit error injection, and rate testing features, catering to the diverse needs of modern digital communications. By integrating these dynamic capabilities, DapTechnology’s FireCore solutions improve packet management and overall network efficiency. Through continuous innovation, FireCore solutions have fortified DapTechnology's position as a leader in IEEE-1394 and Mil1394 technologies. These components provide the foundational architecture for performance-driven application in critical systems, especially within industries demanding high standards of data integrity and speed.
The CAN FD Controller is engineered to incorporate the Controller Area Network as detailed by ISO 11898:2015 Part 1, accommodating both Classical and Flexible Data Rate CAN frame formats. It boasts support for bit rates reaching up to 1 Mbit/s for classical CAN and up to 10 Mbit/s for the flexible data rate variety. Developed in accordance with DO-254 DAL A standards, it provides robustness and reliability for demanding automotive and industrial applications.
The INAP375R Receiver is a component of the APIX2 technology suite, tailored to meet the stringent demands of automotive infotainment systems. It supports bi-directional, high-speed data transfer over a single twisted pair cable, up to distances of 12 meters, offering flexibility for complex vehicle architectures. The receiver integrates advanced error correction protocols and supports RGB and LVDS video interfaces, making it ideal for high-definition display applications in vehicles.
Join the world's most advanced semiconductor IP marketplace!
It's free, and you'll get all the tools you need to discover IP, meet vendors and manage your IP workflow!
No credit card or payment details required.
Join the world's most advanced AI-powered semiconductor IP marketplace!
It's free, and you'll get all the tools you need to advertise and discover semiconductor IP, keep up-to-date with the latest semiconductor news and more!
Plus we'll send you our free weekly report on the semiconductor industry and the latest IP launches!