All IPs > Memory Controller & PHY > Flash Controller
Flash Controller semiconductor IPs play a critical role in the efficient functioning of memory systems within various electronic devices. These controllers are integral in managing the storage, retrieval, and data transfer processes between memory and the system's main processing units. At their core, flash controllers serve as the interface that translates system-level requests into commands that can be understood by the flash memory itself.
In today's fast-paced digital world, flash controllers are essential components in a wide array of devices, from mobile phones and tablets to laptops and enterprise storage solutions. They ensure that data is written, read, and erased accurately in flash memory, optimizing performance while also extending the lifespan of the memory components. By leveraging advanced error correction codes (ECC), wear leveling, and bad block management strategies, these semiconductor IPs enhance the reliability and durability of the storage system.
Within this category, you'll find a range of flash controller solutions tailored for different types of flash memory technologies, such as NAND, NOR, and the increasingly popular 3D NAND. Each of these controllers is designed to meet specific performance, power, and cost requirements, thereby offering solutions for both consumer and industrial applications.
Ultimately, the selection of a flash controller can greatly influence the overall efficiency and user experience of a product. By choosing the right semiconductor IP from our Flash Controller category at Silicon Hub, product developers can ensure optimal performance for their storage applications, leading to faster, more reliable electronics.
The NVMe Host Controller from iWave Global offers an advanced solution for managing NVMe drive interfaces in computing systems. This controller is designed to facilitate the high-speed data exchange that NVMe drives demand, streamlining operations across data-centric applications. Engineered for scalability and performance, the NVMe Host Controller supports high data throughput, ensuring quick access and transfer of data between storage devices and host systems. Its design caters to the demands of modern computational environments where rapid data retrieval and storage are critical. The controller is integral in systems requiring high-performance storage solutions, and its support for multiple interfaces underscores its adaptability and broad applicability in data-intensive industries such as enterprise storage and high-performance computing.
CrossBar's ReRAM Memory brings a revolutionary shift in the non-volatile memory sector, designed with a straightforward yet efficient three-layer structure. Comprising a top electrode, a switching medium, and a bottom electrode, ReRAM holds vast potential as a multiple-time programmable memory solution. Leveraging the resistive switching mechanism, the technology excels in meter-scale data storage applications, integrating seamlessly into AI-driven, IoT, and secure computing realities. The patented ReRAM technology is distinguished by its ability to perform at peak efficiency with notable read and write speeds, making it a suitable candidate for future-facing chip architectures that require swift, wide-ranging memory capabilities. Unprecedented in its energy-saving capabilities, CrossBar's ReRAM slashes energy consumption by up to 5 times compared to eFlash and offers substantial improvements over NAND and SPI Flash memories. Coupled with exceptional read latencies of around 20 nanoseconds and write times of approximately 12 microseconds, the memory technology outperforms existing solutions, enhancing system responsiveness and user experiences. Its high-density memory configurations provide terabyte-scale storage with minimal physical footprint, ensuring effective integration into cutting-edge devices and systems. Moreover, ReRAM's design permits its use within traditional CMOS manufacturing processes, enabling scalable, stackable arrays. This adaptability ensures that suppliers can integrate these memory solutions at various stages of semiconductor production, from standalone memory chips to embedded roles within complex system-on-chip designs. The inherent simplicity, combined with remarkable performance characteristics, positions ReRAM Memory as a key player in the advancement of secure, high-density computing.
Dolphin Technology offers a comprehensive range of memory IP products, catering to diverse requirements in semiconductor design. These products include a variety of memory compilers, specialty memory, and robust memory test and repair solutions such as Memory BIST. Designed to meet the demands of contemporary low-power and high-density applications, these IPs are built to work across a broad spectrum of process technologies. Advanced power management features, like light and deep sleep modes and dual rails, enable these products to tackle even the toughest low-leakage challenges. What sets these products apart is their flexibility and adaptability, evident in the support for different memory types and process nodes. Dolphin Technology’s memory IPs benefit from seasoned design teams that have proven their mettle in silicon across several generations. Thus, these IPs are not only versatile but also reliable in serving a wide variety of industry needs for technology firms worldwide. Clients can expect memory solutions that are fine-tuned for both power efficiency and performance. Additional capabilities such as power gating cater to ultra-low power devices while achieving a high level of device integration and compatibility. The specialized focus on low noise and rapid cycle times makes these memory solutions highly effective for performance-driven applications. These features collectively make Dolphin Technology’s memory IP an invaluable asset for semiconductor designers striving for innovation and excellence.
Ncore Cache Coherent Interconnect is designed to tackle the multifaceted challenges in multicore SoC systems by introducing heterogeneous coherence and efficient cache management. This NoC IP optimizes performance by ensuring high throughput and reliable data transmission across multiple cores, making it indispensable for sophisticated computing tasks. Leveraging advanced cache coherency, Ncore maintains data integrity, crucial for maintaining system stability and efficiency in operations involving heavy computational loads. With its ISO26262 support, it caters to automotive and industrial applications requiring high reliability and safety standards. This interconnect technology pairs well with diverse processor architectures and supports an array of protocols, providing seamless integration into existing systems. It enables a coherent and connected multicore environment, enhancing the performance of high-stakes applications across various industry verticals, from automotive to advanced computing environments.
YouDDR is a comprehensive technology encompassing not only the DDR controller, PHY, and I/O but also features specially developed tuning and testing software. It provides a complete subsystem solution to address the complex needs of DDR memory interfaces. The integrated approach allows for cohesive synchronization between the controller and PHY, optimizing performance and reliability. The YouDDR technology ensures seamless integration into a variety of platforms, supporting a broad range of applications from simple consumer electronics to advanced computing systems. By offering enhanced tuning capabilities, it allows developers to fine-tune performance metrics, ensuring that systems can operate within their optimal performance windows. Developers utilizing YouDDR benefit from a thoroughly tested and verified subsystem that significantly simplifies the design cycle. This not only reduces development time but also enhances the likelihood of first-pass success, providing a competitive edge in manufacturing efficiency and product launch speed.
CrossBar's ReRAM IP Cores present a sophisticated solution for enhancing embedded NVM within Microcontroller Units (MCUs) and System-on-Chip (SoC) architectures. Designed to work with advanced semiconductors and ASIC (Application-Specific Integrated Circuit) designs, these cores offer efficient integration, performance enhancement, and reduced energy consumption. The technology seeks to equip contemporary and next-generation chip designs with high-speed, non-volatile memory, enabling faster computation and data handling. Targeting the unique needs of IoT, mobile computing, and consumer electronics, the ReRAM IP Cores deliver scalable memory solutions that exceed traditional flash memory limits. These cores are built to be stackable and compatible with existing process nodes, highlighting their versatility. Furthermore, the integration of ReRAM technology ensures improved energy efficiency, with the added benefit of low latency data access—a critical factor for real-time applications and processing. These IP cores provide a seamless route to incorporating high-performance ReRAM into chips without major redesigns or adjustments. As the demand for seamless, secure data processing grows, this technology enables manufacturers and designers to aptly meet the challenges presented by ever-evolving digital landscapes. By minimizing energy usage while maximizing performance capabilities, these IP cores hold potential for transformative applications in high-speed, secure data processing environments.
The Zhenyue 510 SSD Controller represents a pivotal advancement in solid-state drive technology, tailored to meet the rigorous demands of enterprise-grade storage solutions. It leverages state-of-the-art technology to deliver exceptional data throughput and reliability, ensuring swift data access and enhanced storage efficiency. This controller is engineered to minimize latency, making it highly suitable for environments where data speed and reliability are crucial, such as cloud computing and enterprise data centers. With the ability to handle large volumes of data effortlessly, the Zhenyue 510 SSD Controller sets new benchmarks for performance and energy efficiency in storage solutions.
The NVMe Streamer from MLE empowers next-generation storage solutions with its cutting-edge data streaming capabilities. NVMe technology, known for robust performance, is utilized here to achieve accelerated data processing and storage for critical applications. The NVMe Streamer provides high-speed connectivity, facilitating seamless data capture and record-keeping in high-bandwidth environments, such as cloud computing and data centers. With support for PCIe 3.0/4.0/5.0 standards, this IP core ensures compatibility with present and future hardware, fostering consistent and reliable performance across deployments. It acts as a pivotal component for computational storage and data movement, backing up extensive data processing with minimal latency and maximum throughput, essential for real-time operations and intensive data tasks. Design flexibility inherent in the NVMe Streamer allows it to be tailored to specific infrastructure needs, offering scalable solutions that can grow with technological advancements. This adaptability is key for organizations seeking to future-proof their storage capabilities in a fast-evolving digital landscape.
The LPDDR4/4X/5 Secondary/Slave PHY is designed as a memory-side interface IP primarily used in DRAM products. This technology enables efficient data communication between AI processors, in-memory computation units, and other advanced memory technologies. Supporting both LPDDR4X and LPDDR5 standards as outlined by JEDEC, it caters to a broad spectrum of devices. Originally developed for 7nm TSMC processes, this PHY can be adapted for various manufacturing processes, ensuring compatibility with a diversity of memory types, including DRAM, SRAM, and novel NVM technologies, providing extensive reach across industries.
Floadia's LEE Flash G2 transcends standard flash memory by blending the qualities of logic and memory. This provides a dual benefit of non-volatile performance with logic-level operation, achieved through its unique tri-gate transistor architecture. The G2 cell combines a SONOS transistor with switching transistors, offering high-speed, non-volatile SRAM capabilities. The G2 memory's design addresses one of the major challenges in memory technology: reducing power consumption. By employing a programming current that is substantially lower than conventional floating gate NVMs, it considerably lowers power demands. This technology allows for the memory and logic circuits to be connected directly, enabling more efficient chip architectures. Additionally, the LEE Flash G2 supports a novel application where it can function as Non-Volatile SRAM (NV-SRAM). This combination eliminates the need for dedicated flash blocks, thereby streamlining the microcontroller architecture and enabling rapid wake-up or sleep modes. Such a configuration enhances the overall efficiency of systems, especially in complex SOC and FPGA designs.
PermSRAM is a highly adaptive nonvolatile memory macro designed to operate on standard CMOS fabrication processes. It supports a variety of process nodes ranging from 180nm to 28nm and beyond. One of its key features is its ability to offer diverse functionalities such as one-time programmable ROM and pseudo multi-time PROM, along with a multipage configuration that greatly broadens its utility across different applications. A prominent attribute of PermSRAM is its security-oriented design. It incorporates a non-rewritable hardware safety lock for secure code storage, which ensures data integrity and tamper resistance. This product caters to a wide span of memory sizes, from 64 bits to a robust 512K bits, accommodating both minimal and extensive data storage requirements. PermSRAM's inherently stable yield and reliability are complemented by its automotive-grade data retention, making it ideal for demanding applications that require long-term data retention capability at high temperatures. Furthermore, it operates efficiently without the need for a charge pump in read operations, offering significant efficiency and area savings.
The LEE Flash G1 from Floadia is designed as a cost-effective SONOS technology solution. This nonvolatile memory offers remarkable cost efficiency, employing a low-cost process that requires minimal additional masks, thus reducing fabrication complexity. The design ensures compatibility with existing semiconductor processes, making it economical without sacrificing quality or performance. This flash memory is built on a robust SONOS architecture, which stands out for its high reliability, a crucial factor in memory retention and endurance. The electric charge retention mechanism in SONOS is distinct from the traditional floating gate charge storage, offering superior reliability due to its resistance to leakage through defects. By utilizing Fowler Nordheim (FN) tunneling, the G1 guarantees minimal oxide damage and sustains a high level of performance even after many cycles. Additionally, the G1's design focuses on simplifying manufacturing processes by using common materials, allowing for seamless integration into existing foundry workflows. This ease of implementation, combined with its robustness and low power requirements, makes the LEE Flash G1 a key product in high-demand, cost-sensitive applications.
Offering a zero additional mask solution, LEE Flash ZT stands for a zero-technology-cost addition to Floadia’s flash memory repertoire. It is particularly valued for its minimal impact on manufacturing processes while maintaining robust performance attributes inherent to Floadia's memory products. This memory eliminates additional mask requirements in the production process, which not only reduces costs but also simplifies the manufacturing workflow. The ZT model effectively retains the essential features of robustness and high reliability, necessary for modern semiconductor applications, through its efficient architecture. In terms of functionality, the ZT adheres to high standards of charge retention and endurance, similar to other products in Floadia's lineup. With this design choice, Floadia ensures that the technology maintains the integrity and reliability expected from advanced embedded memory solutions, making it suitable for a wide array of industrial applications.
Tower Semiconductor's non-volatile memory solutions leverage cutting-edge design to enhance data retention and simplify integration within various devices. The solutions include advanced Y-Flash and e-Fuse technologies, offering reliable data storage options that retain information without a constant power supply. This makes them ideal for applications requiring persistent data, ranging from consumer electronics to critical industrial controls. The NVM solutions are designed to offer high endurance and retention periods, granting devices the capability to operate effectively across diverse environmental conditions. Y-Flash supports fast write and erase times, while e-Fuse enables secure, permanent programming options, prototyping a versatile memory solution suitable for field programming and personalization. In addition to their technological sophistication, these solutions are supported by a comprehensive suite of design resources including detailed libraries and validation data. This ensures seamless integration with existing architectures, allowing designers to rapidly bring enhancements to market. As such, Tower Semiconductor's NVM offerings signify a blend of reliability, adaptability, and innovation in modern data storage technology.
CodaCache Last-Level Cache is an advanced, shared cache solution specifically designed to minimize memory latency and boost SoC performance. Its configurable nature allows it to be tailored to specific design needs, optimizing data flow and enhancing power efficiency across the chip. This cache helps overcome common SoC challenges related to timing closure, performance, and layout congestion by providing a flexible caching architecture that ensures effective data management and reliable operations. Its role in optimizing memory hierarchy enhances computational speeds and system reliability. CodaCache is particularly beneficial for applications that require rapid access to large data sets, ensuring that power consumption is minimized while maintaining high performance standards. Its versatility and efficiency make it a top choice for industries striving for high data throughput and low latency operations.
LEE Fuse ZA from Floadia offers a unique approach with its zero additional mask anti-fuse memory technology. Designed for one-time programmable (OTP) applications, this memory type is cost-efficient and easily adaptable to existing manufacturing processes without requiring additional masks. The ZA fuse is characterized by its reliable anti-fuse mechanism, providing secure data retention. It excels in applications requiring a permanent programming solution and offers high endurance due to its robust design. By eliminating the need for complex mask layers, the LEE Fuse ZA significantly cuts down production costs while maintaining superior performance. Its compatibility with standard CMOS processes further underscores its suitability for various implementations where cost efficiency and reliability are paramount. The design guarantees effective fuse operation, making the LEE Fuse ZA a popular choice for applications in diverse sectors needing a robust OTP solution.
The IPM-NVMe Device is crafted to empower developers to build custom hardware accelerators and SSD-like applications. Offering a high degree of customization, it acts as a foundation upon which cutting-edge applications can be realized. With its NVMe compliance, developers can integrate this IP to create high-performance storage solutions that are both adaptable and efficient. This module's versatility is exemplified by its support for enhanced data transfer rates, making it a suitable choice for environments demanding rapid data processing. The IPM-NVMe Device can be deployed in scenarios that require robust data handling capabilities while maintaining performance integrity. Designed with modularity in mind, the IPM-NVMe Device IP allows for the implementation of custom features, facilitating innovations such as new data management protocols, hardware accelerations, and more. Its deployment simplifies the challenging task of creating bespoke SSD solutions tailored to specific market needs and technological advancements.
Global Unichip Corp.'s High Bandwidth Memory solution is engineered to facilitate vast data transfer rates crucial for AI and high-performance computing tasks. This product is pivotal in reducing latency and increasing bandwidth, addressing performance bottlenecks often faced in data-intensive applications. Through the integration of advanced packaging technologies, the High Bandwidth Memory enables seamless communication between systems, enhancing operational efficiencies. The solution also supports multiple process nodes which allows for scalability across various semiconductor technologies. This adaptability ensures it meets diverse industry requirements from data centers to AI-driven applications. This IP’s design also promotes efficient thermal management, necessary for maintaining optimal function under high workloads. Emphasizing innovations in interconnectivity, the High Bandwidth Memory works hand in hand with other IPs in GUC’s portfolio, creating a comprehensive ecosystem for modern semiconductor solutions. Its design is aligned with global standards for memory solutions, ensuring broad compatibility and ease of integration into existing systems, leading to quicker deployment and reduced time-to-market.
Featuring G15, this IP is optimized for 2KB correction blocks, suitable for NAND devices with larger page sizes, such as 8KB. The design is aligned with methods seen in the G14X, but it extends its reach with longer codewords for comprehensive coverage of high-density NAND. The design supports a wide array of block sizes and configurational setups, making it highly adaptable to varying design needs. Additional error correction capabilities can be integrated based on client requirements, reinforcing its bespoke delivery.
The Cyclone V FPGA with Integrated PQC Processor by ResQuant is a specialized product that comes pre-equipped with a comprehensive NIST PQC cryptography suite. This FPGA is tailored for applications requiring a robust proof-of-concept for quantum-safe implementations. It ensures seamless integration into existing systems, providing a practical platform for testing and deployment in quantum-secure environments. This product is available at a competitive price and represents an ideal starting point for entities looking to explore and adopt quantum-resilient technologies. Its configuration allows for straightforward implementation in diverse hardware infrastructures while offering a reliable option for organizations aiming to stay ahead in the evolving cyber security landscape. By incorporating the latest in cryptographic standards and ensuring vendor independence, the Cyclone V FPGA with Integrated PQC Processor by ResQuant effectively bridges current hardware technologies and future-proof security needs. It supports industry-wide applications, from IoT and ICT to automotive and military sectors, underscoring ResQuant's versatility in hardware security solutions.
Flash solutions from PRSsemicon incorporate comprehensive design and verification IPS, constantly updated to harmonize with the latest specifications. These solutions support a breadth of flash memory and storage interface standards, ensuring top-tier performance in varied applications.\n\nThe suite includes UFS, eMMC, and SDIO configurations, providing a full spectrum of device and host functionalities, from SPI and XSPI controllers to serial and general flash controllers. Their IPs are engineered with a strong emphasis on backward compatibility, granting seamless adaptability across different generations of technology.\n\nThese flash solutions are designed to be integral to advanced data storage tasks, meeting the rigorous demands of accuracy and speed vital in environments like consumer electronics and data-intensive computing systems. By extending versatile memory interfacing options, PRSsemicon sets a standard in offering reliable, high-speed storage IPs.
SuperFlash® technology is distinguished by its proprietary split-gate Flash memory architecture, designed to deliver high performance with simplified integration into System-on-Chip (SoC) solutions. This technology ensures reliability and efficiency across various industrial applications. It offers compatibility with standard silicon CMOS and has been proven to possess high endurance and excellent data retention capabilities. Given its ability to withstand extreme temperatures while maintaining performance, SuperFlash® is ideal for applications in the automotive sector requiring stringent reliability standards.\n\nThis technology spans multiple process nodes, from 500nm down to 28nm, solidifying its flexibility and adaptability across different foundry platforms. With a distinct advantage of low power consumption, SuperFlash® emerges as a preferred choice for resource-constrained environments, such as IoT devices and smart cards. Its consistent performance in high-temperature conditions and immunity to stress-induced leakage current further underscore its robustness.\n\nThe adaptability of SuperFlash® technology is enhanced by tailored licensure options, which accommodate a wide array of business needs—from semiconductor manufacturers to fabless design firms. This licensing flexibility ensures that businesses of all sizes can effectively integrate SST's Flash solutions, supporting a diverse spectrum of applications spanning automotive to consumer electronics.
PUFsecurity's Flash Protection Series delivers enhanced security for flash storage solutions, extending the robust security measures of their Hardware Root of Trust and Crypto Coprocessor to protect various flash memory options such as embedded flash and external NAND/NOR flash. This suite of solutions irradiates potential vulnerabilities in flash architectures by introducing PUF-based chip fingerprint technology, reinforcing data security within broader SoC applications. By seamlessly integrating these security layers, the Flash Protection Series ensures firmware and proprietary software assets within a chip remain fully protected against external threats and unauthorized access, thus maintaining the integrity and confidentiality of critical data.
The SMPTE ST 2059 IP core serves an essential role in synchronizing audio and video systems across networks, centered around the generation of deterministic timing signals as outlined in SMPTE standards. This IP provides alignment of video and audio signals to a shared time base, achieved through the use of precise timing protocols like IEEE 1588 Precision Time Protocol (PTP). In the realm of professional AV and broadcasting, accurate timing is critical, and the ST 2059 IP core is designed to integrate seamlessly within existing infrastructures, supporting 1G, 10G, 25G, and even 100G Ethernet networks, ensuring high compatibility across various data speeds. The core comes equipped with capabilities for multiple output reference clock generation and customizable synchronization setups, aligning with network speed independency across different environments. The AIP-ST2059 allows for the integration of genlocked SDI equipment with newer IP-based media technology. By supporting both PTP-aware and non-PTP network devices, it ensures versatility and simplifies deployment within mixed network environments. This adaptability is reinforced by the support for multiple programmable outputs and the ability to operate independently of network speeds, thus broadening its application scope in diverse setups.
The G13/G13X series is tailored for 512B correction blocks, particularly used in NAND setups with 2KB to 4KB page sizes. While both variants are crafted to manage the demands of SLC NAND transitions to finer geometries, the G13X allows for correction of a higher number of errors. Designed to fit seamlessly into existing controller architectures, it enables extensions of current hardware and software capabilities without extensive new investments. It offers area optimization through parameter adjustments and supports a range of channel configurations for broad applicability.
Our UHS-II solution enhances data transfer capabilities under low-voltage conditions, specifically for applications requiring high-definition content delivery in mobile environments. Leveraging advancements in signal processing and power efficiency, this solution supports robust transmission of HD media, ideal for modern mobile devices that demand seamless media handling. This technology aligns with the latest industry standards to ensure compatibility with a wide array of devices. With its focus on high-speed data transfers, the UHS-II solution is engineered to meet the rising demands for higher data throughput and efficiency in portable electronic devices. It optimizes power further to prolong battery life while maintaining the high-speed data rates crucial for real-time applications. This facilitates uninterrupted streaming and quick data access, vital for enhancing user experience in mobile ecosystems. Furthermore, the UHS-II standard ensures that users experience minimal latency during content swapping and access, making it a critical component for devices requiring efficient data management. By integrating UHS-II technology, device manufacturers can offer improved media handling capabilities, thus positioning themselves competitively in the fast-evolving mobile market.
The NuLink Die-to-Memory (D2M) PHY products from Eliyan provide a robust solution for memory-intensive applications, offering high bandwidth and low power consumption. This technology stands out by providing a dynamic communication link devoid of the constraints of fixed unidirectional die-to-die architectures. Utilizing a bidirectional approach, it supports greater efficiency and performance. D2M PHY products are pivotal in scenarios where a substantial separation is necessary between heat-sensitive memory and high-power ASICs, optimizing thermal management and power distribution across the package. The bidirectional design enhances flexibility and scalability, allowing seamless adaptation to different die configurations required for evolving technological demands.
Designed to scale effectively with the growing needs for high-volume data storage, CrossBar's ReRAM IP Cores for High-Density Data Storage offer clients the ability to manage extensive datasets with ease. The cores excel in providing high-speed data access and retrieval capabilities, making them an ideal choice for data centers, AI infrastructure, and complex analytics platforms. These cores support dense data storage configurations within devices, far surpassing the performance specifications of traditional memory options. CrossBar's ReRAM cores offer significant energy savings in storage operations, enabling data centers to drastically reduce power consumption while increasing throughput and efficiency. This green approach to data storage not only enhances computational performance but also aligns with global sustainability efforts to lower energy expenditure. With high-density capabilities, the ReRAM cores play a critical role in optimizing large-scale data handling and facilitate emerging trends like real-time analytics and advanced machine learning algorithms. Integrated into existing infrastructures, these ReRAM cores transcend traditional memory solutions. The technology's flexibility allows for customization, accommodating varied client needs and extending beyond standard operational limitations. Whether deployed in cloud services, enterprise data warehousing, or sophisticated AI training models, CrossBar's ReRAM cores ensure robust performance, reliability, and scalability in handling complex storage challenges.
Tailored for applications requiring secure non-volatile memory, CrossBar's ReRAM as FTP/OTP Memory offers a refined solution for few-time programmable (FTP) and one-time programmable (OTP) needs. Leveraging the intrinsic properties of ReRAM technology, these applications benefit from reduced write requirements and minimized area without compromising security or performance. This ReRAM variant integrates effectively within standard CMOS processes, providing adaptability whether used independently or embedded within more complex systems. Its non-volatility and high density make it a preferred choice for secure applications where cost-efficient data integrity is essential. The technology supports diverse applications across numerous sectors including automotive, medical, and industrial systems, where quick response times and reliability are critical. The FTP/OTP ReRAM enables provisioning for physical unclonable functions (PUF), further enhancing its security capabilities. Such an implementation provides resistance to invasive attacks and maintains data integrity even under adverse conditions. These features position ReRAM as a powerful tool for managing sensitive data operations and broad pursuits in modern digital infrastructures.
Designed for the Graphics DDR6 standard, MEMTECH's G-Series Controller delivers exceptional data throughput at speeds up to 18 Gbps per pin, supporting highly demanding applications like gaming, video processing, and high-performance computing. Its dual-channel support, alongside advanced scheduling, ensures the optimization of data transactions critical for high-performance requirements. The controller's design offers dynamic reconfiguration capabilities and hardware-based auto-initialization, which adapt to changing performance needs and reduce initial setup times. With features like automatic transaction retries for error detection and a high level of configurability, the G-Series Controller stands out in the field of graphic data management. Compliant with both DFI 5.0 and extended GDDR6 standards, this controller facilitates seamless integration with existing graphics systems, ensuring that it delivers optimal performance across diverse workloads. Its robust architecture is specifically engineered to cater to the power and performance needs of graphics-intensive applications.
The I-fuse technology from Attopsemi is a revolutionary OTP memory design characterized by its non-explosive action, circumventing the limitations of traditional anti-fuse technology. I-fuse is crafted without requiring specialized masks, utilizing standard logic design processes, allowing for broad compatibility across various tech platforms. Operating across a substantial spectrum from 0.7 µm to 22 nm, it promises exceptional reliability and efficiency, offering higher testability and competitive advantages in size and power use. I-fuse stands out due to its scalability, adaptability for varied applications, and compliance with the AEC-Q100 Grade 0 specification, which makes it robust enough for applications where reliability can’t be compromised. This OTP technology provides enhanced flexibility and precision, especially in automotive and industrial settings. It leverages Attopsemi's extensive patent portfolio and production experience, incorporating the company's 90+ patents into its design principles. With the shipment of over 10,000 wafers per month, I-fuse has demonstrated its practical use and benefits across hundreds of enterprises globally, performing with no reported failures and ensuring a lasting footprint in the market.
Eureka Technology's NAND Flash Memory Controller is integral for managing NAND flash memory operations, offering efficient handling of read, write, and erase functions. This controller is pivotal for applications needing reliable and robust data storage solutions, from mobile devices to enterprise servers. The controller is designed to optimize flash memory cycles, extending the lifespan of storage components. It incorporates sophisticated algorithms for error correction and wear leveling, ensuring data integrity and prolonging device endurance even in heavily-used environments. Compatible with various NAND flash configurations, this controller offers flexible interface options, adapting to specific application requirements. Its architecture supports scalability and future-proofing, allowing integration into both current and next-generation products with ease.
The X1 SATA SSD Controller by Hyperstone offers a comprehensive solution designed to excel in industrial-grade applications. This controller is integrated with a 32-bit dual-core microprocessor and comes equipped with specialized instruction sets. It's enhanced with hardware accelerators to efficiently manage NAND flash memory, reducing computational latency. The controller's design focuses on reliability and endurance, ensuring robust performance in varied environmental conditions. Incorporated within the X1 are features like the customizable hyMap® sub-page-based Flash Translation Layer (FTL) which optimizes write performance and minimizes write amplification – crucial for maximizing endurance without the need for external DRAM. Additionally, its FlashXE® technology provides extended endurance for read operations, paired with advanced ECC algorithms to maintain low error rates and maximize data retention. To cater to the industrial standards, the X1 boasts of hyReliability™ flash management technologies, including sophisticated wear leveling, read disturb management, and power fail-safe features. This not only enhances data protection but ensures consistent performance under demanding operating conditions, making it ideal for use in SSDs, CFast cards, and embedded SATA applications.
Mobiveil's NAND Flash Controller employs a design suitable for accessing NAND Flash storage with high-speed, multi-page transaction capabilities. It supports recent ONFI and toggle protocol iterations, giving flexibility in addressing and control. Tailored for enterprise storage environments, it enhances system reliability and performance for SSD applications, managing high-speed data throughput efficiently.
The U9 Flash Memory Controller is designed to address the demanding requirements of industrial applications utilizing USB 3.1 interfaces. This controller is engineered with a focus on reliability and long-term operational stability, making it ideal for use in industrial storage solutions. It integrates Hyperstone's hyReliability™ flash management to provide advanced data protection and error correction through a powerful ECC engine. With emphasis on data security, the U9 controller offers high-performance AES encryption options that cater to industrial data privacy needs. The design includes instruction sets optimized for flash memory, ensuring efficient data handling and processing. Additionally, the U9 delivers dynamic chip support, accommodating the latest in flash memory technologies and ensuring extended operational life. The U9 provides a turnkey solution, inclusive of necessary firmware and development tools, simplifying the process of creating custom firmware extensions. It supports various USB-based storage applications, demonstrating versatility in implementation across different industrial contexts, ensuring both data security and system reliability.
The S9 microSD and SD Controller from Hyperstone is designed to deliver high reliability and flexibility in demanding industrial environments. Developed with a deep understanding of NAND flash's operational demands, the controller integrates hyReliability™ and hyMap® technologies to provide superior data management and protection. Focusing on security, the S9 controller is available in specialized variants that include advanced security features designed to meet specific industrial requirements. This security-centric design ensures that the controller can provide robust protection for sensitive data, making it suitable for applications requiring data integrity and protection. Additionally, the controller supports a wide range of interfaces up to the SD 7.1 standard, ensuring compatibility with the latest storage demands. The turnkey nature of the controller, together with its flexibility and support for custom firmware extensions, makes it an attractive choice for various SD card-based applications in industrial settings.
The GDDR7 PHY and Controller is designed to deliver superior memory bandwidth, ideal for high-performance applications such as gaming and data centers. With support for speeds from 20Gbps to 36Gbps, this memory architecture provides flexibility and robust performance for graphics-intensive operations, enabling seamless data transfer and efficient power consumption. The GDDR7 solution integrates advanced techniques to minimize latency and optimize data throughput, ensuring that users can enjoy high-resolution visuals and responsive computing experiences without compromise. This sophisticated IP effectively supports multiple generations of GDDR memory technologies, offering backward compatibility that ensures a smooth transition for designers migrating from previous platforms. Its scalable architecture provides future-proofing for emerging requirements in AI, machine learning, and high-performance computing applications. By leveraging advanced process nodes, the GDDR7 PHY and Controller enhances power efficiency and operational efficiency, perfectly aligning with the needs of data-rich environments. The controller is equipped with industry-leading signal integrity and energy efficiency features, making it suitable for integration in advanced computing systems. This ensures not only enhanced performance but also delivers on cost efficiency, making it a preferred choice for designers looking to push the limits of graphics technology without inflating production costs.
The LPDDR5X PHY is specialized as a memory-side interface IP for state-of-the-art DRAM applications. With compliance to JEDEC standards for LPDDR5X, it ensures seamless high-speed, low-power data transfer among AI and memory solutions. Initially intended for production on 7nm TSMC platforms, this solution is adaptable, suitable for a range of other processes, thereby extending its application across numerous memory technologies, from traditional DRAM and SRAM to innovative non-volatile memory designs, making it a valuable component in forward-thinking applications.
Our Embedded ReRAM technology empowers seamless integration into existing system-on-chip (SoC) designs, delivering a compact, efficient memory solution. Designed to cater to the needs of modern electronics, it provides significant advancements in speed and power efficiency over traditional non-volatile memory (NVM) options. With the ability to operate reliably under diverse environmental conditions, this embedded solution is ideal for a wide range of applications including IoT devices, automotive systems, and smarter consumer electronics. One of the standout features of Embedded ReRAM is its eco-friendliness and scalability. Despite being embedded, it ensures a minimal footprint while maintaining high performance, making it a favorable choice for future-proof designs. This technology is engineered to enhance data retention and withstand the rigors of extreme operational environments, reinforcing its suitability for automotive and aerospace applications. The innovation behind Embedded ReRAM focuses on delivering a combination of low-power operation and high-speed performance, overcoming the limitations associated with traditional flash memory. This makes it an exceptionally versatile component in designing edge computing solutions and energy-efficient AI hardware, driving forward the evolution of next-gen intelligent devices.
Specially designed for 1KB correction blocks, the G14/G14X series caters to NAND devices with 8KB page sizes. Its versatility allows support for both 512B and 1024B blocks, accommodating SLC and MLC flash requirements effectively. It enhances controller performance with provisions for extended wear leveling and robust error correction across various generations of flash technology. The series also offers customization possibilities to meet diverse latency, bandwidth, or spatial demands.
LogicFlash Pro® eFlash is an advanced embedded flash memory technology delivering superior performance for modern digital systems requiring efficient data storage solutions. It is a product equipped to meet high demands for data throughput while maintaining long-term reliability. This IP stands out due to its ability to support a large number of re-write cycles, thus ensuring longevity and reliability in applications critical to seamless operation like in automotive and industrial controls. Its robust architecture supports rapid data processing, a critical feature for high-speed operations in complex systems. The LogicFlash Pro® eFlash integrates easily within different semiconductor processes, providing flexibility in design and application. Its design focuses on optimizing power use while retaining high-speed performance, thus catering to the growing need for efficient energy usage in today's technologically driven landscape.
The NAND Memory Subassemblies by Avant Technology are pivotal in modern data storage, offering significant advantages over traditional hard disks. Their non-volatile nature allows for swift data access and robust durability, making them ideal for portable electronics such as flash drives, MP3 players, and digital cameras. Avant focuses on integrating these smaller, more power-efficient NAND memories into chips, enhancing the devices' performance by providing compact and reliable data storage solutions. NAND's ability to be erased and rewritten numerous times without compromising storage capabilities ensures it can handle large data volumes. This trait is particularly beneficial for compact devices, ensuring efficient data management and long-term storage without degradation. The varied form factors offered, such as MO-300, 2.5 IN, and the range of M.2 formats, cater to different application demands, ensuring versatility and adaptability in various consumer and industrial markets. With interfaces like SATA and PCIe NVME GEN 3 and 4, the NAND Memory Subassemblies deliver superior data transfer speeds and enhanced power efficiency. These characteristics make them a preferred choice for clients across consumer, industrial, and client markets. Avant Technology ensures that each NAND product conforms to industry specifications and maintains high performance under diverse environmental conditions.
Mobiveil's NVM Express Controller is devised for dynamic flexibility in enterprise and client storage solutions, boosting the potential of PCIe-based SSDs. Designed to handle multi-core environments with independent threading, the controller optimally balances link utilization, latency, and power consumption. By pairing with Mobiveil's PCIe controller or third-party NAND controllers, it ensures efficient high-speed data handling and storage reliability.
This LPDDR5 PHY from Green Mountain Semiconductor is structured to serve as a critical memory-side interface within DRAM implementations. Its architecture is aimed at AI processing units and other ASIC technologies that require efficient, high-speed, low-energy data communication as specified by JEDEC’s LPDDR5 guidelines. Although primarily configured for 7nm TSMC nodes, its versatile nature allows for integration into various logical processes, broadening its utility across different memory technologies such as DRAM, SRAM, and new-age non-volatile memories.
Aragio offers robust memory interface solutions for various DDRx memory standards, such as DDR, DDR2, DDR3, and DDR4, incorporating SSTL I/O support. These interfaces include comprehensive I/O and spacer cells necessary for constructing a padring by abutment, and provide the flexibility of isolated power domains for efficient power management. With the support of JEDEC-compliant standards, these solutions are designed to handle high-speed data rates while maintaining energy efficiency and robust performance, ideal for modern memory applications.
The XILINX NVME HOST RECORDER IP is optimized for high-speed data processing and efficient storage management, enabling smooth handling of NVMe protocols across varied applications. It is specifically tailored to deliver high throughput and low latency, making it ideal for rapid data access and real-time processing environments. With an architectural emphasis on scalability and performance, this IP seamlessly integrates NVMe functionalities to boost data handling capabilities. Its versatility ensures compatibility across multiple systems, enhancing reliability and operational efficiency. This adaptability makes it crucial for applications requiring robust data management. The design of the XILINX NVME HOST RECORDER IP focuses on minimizing power usage, thereby promoting more sustainable and cost-effective operations. Its efficient resource management extends the lifecycle of deployed systems, making it an essential component for modern computing infrastructures aiming for optimal data control and management performance.
Designed to bridge existing architectures with high-speed storage technology, the IPM-NVMe Host module offers a streamlined pathway to leverage PCIe NVMe SSDs. This IP component facilitates the direct control of NVMe SSDs as easily as traditional non-volatile memory, rendering it an invaluable tool in high-performance computing environments. The main attribute of the IPM-NVMe Host is its ability to manage the interface intricacies of NVMe technology, thereby enabling system architects to focus on achieving optimal system performance. Its architecture ensures minimal latency, maximizing throughput which is essential in data center and enterprise storage solutions. Tailored for integration into larger systems, the IPM-NVMe Host ensures compatibility across diverse platforms. It supports rapid prototyping and deployment, allowing developers to expedite their solution delivery and achieve high-speed data processing capabilities without substantial effort in integration.
The F9 CF PATA Flash Controller is crafted to provide enduring reliability and performance suited for industrial CompactFlash (CF) applications. This controller stands out with its capability to meet the rigorous demands of sectors reliant on solid-state storage where robustness and longevity are of utmost importance. Engineered with Hyperstone’s renowned hyReliability™ technology, the F9 ensures high endurance through advanced wear leveling, read disturb management, and power fail protection. The Flash Translation Layer (FTL) integrated within, known as hyMap®, delivers superior write performance with minimal amplification, boosting the lifespan of storage solutions even in intensive usage scenarios. Designed for extensive compatibility, the F9 supports a wide array of flash memory technologies, made possible through its flexible 96-Bit/1K BCH ECC engine and optimized RISC core. It facilitates enhanced encryption capabilities via its AES engines, ensuring data security alongside reliability, which is critical for CF cards and PATA SSDs used across various industrial applications.
The D-Series DDR5/4/3 Controller from MEMTECH stands out as a highly optimized memory controller designed to handle the substantial latency, bandwidth, and area requirements of modern computing systems. It supports a variety of DDR standards — DDR5, DDR4, and DDR3 — connecting seamlessly to the PHY layer via the standard DFI 5.0 interface. This controller employs advanced scheduling and sequencing techniques to maximize throughput and efficiency. Integrated ECC mechanisms ensure data integrity, making it reliable for data-critical applications. With 300+ customizable features, designers can tailor its functionality to suit specific system needs, achieving a high degree of product differentiation. Incorporating a design that supports multiple standard interfaces such as AXI5, CHI, and APB5, the D-Series Controller is versatile, ensuring ease of system integration and effective data handling. Its robust architecture is ideal for applications in data centers, networking, and personal computing, providing high-bandwidth support essential for efficient data processing.
Specially designed for radiation-hard markets, Everspin's MRAM solutions provide reliable memory options for space and military applications. These MRAM products ensure data integrity even under the challenging radiation conditions found in space. The technology prides itself on its resilience, offering non-volatile memory that isn’t susceptible to upsets commonly caused by radiation. This makes it an ideal option for satellite, aerospace, and other space-bound technologies requiring high reliability over extended periods. Radiation-hard MRAM by Everspin delivers performance akin to other volatile memory types but eliminates the need for constant power supply. It’s tailored for applications where data must endure harsh external factors while maintaining rapid access and operational efficiency.
Join the world's most advanced semiconductor IP marketplace!
It's free, and you'll get all the tools you need to discover IP, meet vendors and manage your IP workflow!
No credit card or payment details required.
Join the world's most advanced AI-powered semiconductor IP marketplace!
It's free, and you'll get all the tools you need to advertise and discover semiconductor IP, keep up-to-date with the latest semiconductor news and more!
Plus we'll send you our free weekly report on the semiconductor industry and the latest IP launches!